Yugo Mod 24 Stock

[aspen80]

Hi Guys,

I just bought a Yugo Mod 24 short rifle that has a duffle cut stock.
What is my choice to restock this to original?

Thanks for your information

Aspen 80

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[cipherk98]

I take it the pieces needed are missing? Otherwise the fix would be to drill four holes - two in the cut piece, two in the rest of the stock, taking care they line up. Glue dowels into one set, then install it. If the pieces are missing I think any M24/47 or M48 will work, with the M24/47 stock being closer to the original.

[Eaglelord17]

A M24/47 stock is a M24 stock. The M24/47 was a rework of the M24s to bring them to a more updated standard (similar to the M48s, they also did the same thing for VZ-24s and K98ks). The stock remained the same except if you had a couple unique variations or it was too badly damaged (I had a M24/47 stock which was made from a M24 Cavalry Carbine stock, you could tell as they fitted a piece of wood into the cut out that had existed for the down-turned bolt).

If a M24/47 stock isn't available the next best as mentioned would be a M48 stock. Since the action is a intermediate length you are limited as to what stocks can be placed on the rifle.

[aspen80]

Thanks guys for the info on the stock.
The missing piece is just that, missing.
For the price I just had to take it home. It had a locked up bolt but I had it unlocked in about 30 sec.
All numbers matching except for the floor plate

Thanks again guys

Gilmore

[Aragorn243]

24/47 stocks are generally available on ebay in the $50 or less range. I just bought one about six months ago for $35.