+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 41

Thread: Need advice, PH scope base/rings?

Click here to increase the font size Click here to reduce the font size

Hybrid View

OldSalty Need advice, PH scope... 08-12-2017, 02:39 AM
Gil Boyd Welcome to the site. It... 08-12-2017, 04:36 AM
Gil Boyd These may help you in your... 08-12-2017, 05:12 AM
Gil Boyd The Weaver bases No 45 and No... 08-12-2017, 06:03 AM
OldSalty The no 45 weaver rear would... 08-13-2017, 05:19 PM
OldSalty Also, if anyone can help... 08-12-2017, 11:28 AM
rgg_7 Your Parker Hale has a 1200... 08-12-2017, 11:43 AM
Lee Enfield +1 for Farrell Both of... 08-12-2017, 10:54 PM
Gil Boyd All the 1200TX's on the... 08-13-2017, 05:49 AM
OldSalty Thanks for the replies. ... 08-13-2017, 11:18 AM
bigduke6 Don't think that would be in... 08-13-2017, 07:00 PM
Rwsgunsmithing Judging by the flat handle... 08-12-2017, 02:09 PM
OldSalty Thanks for the replies and in... 08-12-2017, 08:36 PM
rgg_7 A "P" prefix is indeed a... 08-13-2017, 11:39 AM
OldSalty The barrell is parker-hale,... 08-13-2017, 12:05 PM
rgg_7 Not seen one in 30-06. If you... 08-13-2017, 12:09 PM
OldSalty Ive had it out of the stock... 08-13-2017, 12:20 PM
rgg_7 Serial number will get it... 08-13-2017, 12:22 PM
rgg_7 I don't think the Weaver 45... 08-13-2017, 05:35 PM
OldSalty Im going to look closer for... 08-13-2017, 06:07 PM
rgg_7 The roll mark of the Importer... 08-13-2017, 08:07 PM
OldSalty This has all been an... 08-13-2017, 08:58 PM
OldSalty Ok took some more pictures,... 08-13-2017, 09:19 PM
rgg_7 Can you measure the barrel... 08-13-2017, 09:31 PM
OldSalty Yes the barrell is 26in and... 08-13-2017, 09:51 PM
Rwsgunsmithing The base should be round and... 08-16-2017, 05:39 PM
OldSalty It is completely flat. I... 08-16-2017, 05:47 PM
Gil Boyd Old Salty, Just check with... 08-16-2017, 05:56 PM
OldSalty Bummer. 08-16-2017, 06:07 PM
Lee Enfield Whoops, you ordered for the... 08-16-2017, 06:08 PM
OldSalty Well that explains it. I... 08-16-2017, 06:14 PM
Lee Enfield I see they also list "Santa... 08-16-2017, 06:22 PM
rgg_7 Pls contact Ken Farrell. The... 08-16-2017, 06:30 PM
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    OldSalty's Avatar
    Join Date
    Aug 2017
    Last On
    09-05-2017 @ 08:22 AM
    Location
    USA
    Posts
    23
    Local Date
    06-12-2025
    Local Time
    04:22 AM

    Need advice, PH scope base/rings?

    Hello All,

    Looking to scope this Parker. I don't know much about it, belive it to be from the mid 60s. The Parker has the 98/148 trigger group/housing. Also, the rifle has a heavy barrell and a "M" stamped into the receiver lock / takedown screw.

    I am looking for a new base and 30mm rings to replace the Buehler adjustable base and 1in rings. The base and rings will need to be high for clearance.

    Ive attached some pics.

    Any ideas of what base and 30mm rings would be a good choice? Im not looking for cheapest but a good value and reliable.

    Than you in advance.

    Cheers,

    OldSalty
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Contributing Member Gil Boyd's Avatar
    Join Date
    Apr 2013
    Last On
    06-10-2025 @ 02:59 PM
    Location
    Home of The Parachute Regiment & 16 Air Assault Brigade
    Posts
    4,772
    Real Name
    Gil Boyd
    Local Date
    06-12-2025
    Local Time
    09:22 AM
    Welcome to the site.
    It looks like you have a .308 M84 target rifle there in a nice condition.
    You will need to source a set of bases and 30mm rings to suit that will allow most target scopes. They should be easy to locate. Did you have a scope size in mind?
    If you can't find the rings and base Stateside let me know and I can provide several gunsmiths details there who may have a set in stock or Norman Clarkes here in the UKicon.
    Last edited by Gil Boyd; 08-12-2017 at 04:48 AM.
    'Tonight my men and I have been through hell and back again, but the look on your faces when we let you out of the hall - we'd do it all again tomorrow.' Major Chris Keeble's words to Goose Green villagers on 29th May 1982 - 2 PARA

  3. Thank You to Gil Boyd For This Useful Post:


  4. #3
    Contributing Member Gil Boyd's Avatar
    Join Date
    Apr 2013
    Last On
    06-10-2025 @ 02:59 PM
    Location
    Home of The Parachute Regiment & 16 Air Assault Brigade
    Posts
    4,772
    Real Name
    Gil Boyd
    Local Date
    06-12-2025
    Local Time
    09:22 AM
    These may help you in your deliberations:
    'Tonight my men and I have been through hell and back again, but the look on your faces when we let you out of the hall - we'd do it all again tomorrow.' Major Chris Keeble's words to Goose Green villagers on 29th May 1982 - 2 PARA

  5. Thank You to Gil Boyd For This Useful Post:


  6. #4
    Contributing Member Gil Boyd's Avatar
    Join Date
    Apr 2013
    Last On
    06-10-2025 @ 02:59 PM
    Location
    Home of The Parachute Regiment & 16 Air Assault Brigade
    Posts
    4,772
    Real Name
    Gil Boyd
    Local Date
    06-12-2025
    Local Time
    09:22 AM
    The Weaver bases No 45 and No 46 would fit that action, then acquire any 30mm Weaver type ring
    'Tonight my men and I have been through hell and back again, but the look on your faces when we let you out of the hall - we'd do it all again tomorrow.' Major Chris Keeble's words to Goose Green villagers on 29th May 1982 - 2 PARA

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    OldSalty's Avatar
    Join Date
    Aug 2017
    Last On
    09-05-2017 @ 08:22 AM
    Location
    USA
    Posts
    23
    Local Date
    06-12-2025
    Local Time
    04:22 AM
    Thread Starter
    The no 45 weaver rear would still need modified though, correct?

    Thanks to everyone for all the helpful info.

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    OldSalty's Avatar
    Join Date
    Aug 2017
    Last On
    09-05-2017 @ 08:22 AM
    Location
    USA
    Posts
    23
    Local Date
    06-12-2025
    Local Time
    04:22 AM
    Thread Starter
    Also, if anyone can help answer some questions, like..

    -what model this looks like? Im thinking 1200TX but it appears slightly different.
    -what receiver is on the rifle? 98 mauser like action?
    -perhaps where i can tell what year the rifle was made? It is stamped "made in england", etc.
    -the stock does seem stock (ha), and has the original rail for sling screws and recoil pad is original PH.

    Im thinking a rail scope base (weaver, picatinny) would be a good option, but it just depends on what might be available.

    If more pictures would help I can supply.

    Also, i might be willing to part with the Buehler base and rings, they are in great shape and look brand new.

    Sorry for all the questions, I am slightly new to shooting sports but my collection is building pretty quick.

    Kindly,

    OldSalty
    Last edited by OldSalty; 08-12-2017 at 11:38 AM.

  9. #7
    Legacy Member rgg_7's Avatar
    Join Date
    May 2007
    Last On
    05-31-2025 @ 01:35 PM
    Location
    Niagara
    Posts
    531
    Real Name
    Ron
    Local Date
    06-12-2025
    Local Time
    05:22 AM
    Your Parker Hale has a 1200 action. You would need to tell me the serial number on the left side of receiver as well as the barrel length, muzzle diameter and markings. Bolt handle is typical shape you would see on the 1200TX target rifle.

    As far as scope bases and rings you can go Parker Hale originals ie A22 rear and A28 fronts. Quite often see these on eBay or just ask here and somebody should be able to help you. If you chose to use PH's you need to stick to there rings which you need to purcase in the after market. Height of ring will depend on scope used.

    If you want a rail there are few manufacturers who offer these - Farrell comes to mind but pricey.

    Hope this helps.

    Ron (Canadaicon)
    Last edited by rgg_7; 08-12-2017 at 11:45 AM.

  10. #8
    Advisory Panel Lee Enfield's Avatar
    Join Date
    Oct 2006
    Last On
    Today @ 03:57 AM
    Location
    out there
    Posts
    1,863
    Local Date
    06-12-2025
    Local Time
    03:22 AM
    Quote Originally Posted by rgg_7 View Post
    ...snip.... You would need to tell me the serial number on the left side of receiver ...snip...

    Hope this helps.

    Ron (Canadaicon)
    +1 for Farrell

    Both of your rear holes appear to be enlarged. IIRC the front (rear) one was enlarged to accept a 2BA cap head screw and securely lock the Parker Hale rear sight into place.

    alternatively Redfield "JR" style base (FN 98 Mauser) & rings are available in 30mm from Leupold.


    The whole serial number is unnecessary:
    roughly speaking:

    Early (c.1964?-70??) 1200TX have no letter prefix.
    from c.1970-1980 they gained an "R" prefix (R was definitely used between 1973-76)
    "P" was also used sometime around this date (not sure whether it was before or after "R").
    around 1980-90 they became a "Z" prefix
    Last edited by Lee Enfield; 08-12-2017 at 11:34 PM.
    BSN from the Republic of Alberta

    http://www.cartridgecollectors.org/

  11. #9
    Contributing Member Gil Boyd's Avatar
    Join Date
    Apr 2013
    Last On
    06-10-2025 @ 02:59 PM
    Location
    Home of The Parachute Regiment & 16 Air Assault Brigade
    Posts
    4,772
    Real Name
    Gil Boyd
    Local Date
    06-12-2025
    Local Time
    09:22 AM
    All the 1200TX's on the records are prefixed with either a P or an R but listed in the registers as M82's arrived from Canadaicon or sold as M82's to York Guns. Sadly speaking, the numbering and letters attributed to this era of weapons was a "mess" and not one a great comoany like Parker Hale could be proud of, it caused great constination!!

    Also found the M98 Sniper S/N S-0001 also sold to Y Guns as a BLACK MAMBA now that is a rare beastwhereever that is now!
    Last edited by Gil Boyd; 08-13-2017 at 05:51 AM.
    'Tonight my men and I have been through hell and back again, but the look on your faces when we let you out of the hall - we'd do it all again tomorrow.' Major Chris Keeble's words to Goose Green villagers on 29th May 1982 - 2 PARA

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    OldSalty's Avatar
    Join Date
    Aug 2017
    Last On
    09-05-2017 @ 08:22 AM
    Location
    USA
    Posts
    23
    Local Date
    06-12-2025
    Local Time
    04:22 AM
    Thread Starter
    Thanks for the replies.

    The serial number is indeed prefixed with a P, which is like P-4....

    Does this basically confirm the 1200tx model?

    I know for sure this rifle is definitely not from the 80's. Because I remember it growing up. Im thinking late 60's but will know for sure later today.

    Also, I forgot to mention not sure why, but this rifle is chambered in 30-06. Most of the 1200tx I have seen on the web seem to be 7.62/308.

    Im taking the rifle to a local gunny tomorrow to have it checked out and ask them about doing some mount work as well.

    Thanks Again,

    OldSalty
    Last edited by OldSalty; 08-13-2017 at 11:23 AM.

+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast

Similar Threads

  1. Parker Hale scope base and rings Product code ID?
    By Rwsgunsmithing in forum Parker Hale Rifles Sub-Forum
    Replies: 8
    Last Post: 01-14-2016, 10:36 AM
  2. WWII 03a4 scope base needs rear scope/base windage screws
    By sonnyboy in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 9
    Last Post: 11-06-2014, 05:16 PM
  3. M84 scope dovetail rings, 1 inch rings too big, what can I do?
    By Ben Cartwright in forum Gunsmithing for Old Milsurps
    Replies: 15
    Last Post: 10-24-2011, 01:33 AM
  4. 03A4 rings and base price check
    By afkid593 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 1
    Last Post: 12-17-2010, 06:49 PM
  5. Lyman 1903A4 base and rings.
    By sormi in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 06-13-2009, 07:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Loading...
Milsurps Voice Mail