Garand Stock Repair

[frankderrico]

I had this very nice stock come into the shop for repair. It was broken at the butt area, probably from bouncing on the ground and a big gouge. You can see the scars from an en-block clip being smack on the side of the stock to straighten out a clip. Here are some pics of the repairs.

Attachment 99560Attachment 99563Attachment 99562Attachment 99561Attachment 99564Attachment 99565

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[gc1054]

I had this very nice stock come into the shop for repair. It was broken at the butt area, probably from bouncing on the ground and a big gouge. You can see the scars from an en-block clip being smack on the side of the stock to straighten out a clip. Here are some pics of the repairs.

Attachment 99560Attachment 99563Attachment 99562Attachment 99561Attachment 99564Attachment 99565

Nice bit of repair work. The two curved pieces for the chips on the butt stock are neat as most of this type of repair were done with a much bigger patch.

[browningautorifle]

Nice...well done Frank.