Authentication Assistance re: m1903a3

[Amasoero@aol.com]

Hello!

I am considering the purchase of a m1903a3 that is being represented as part of an elder gentleman’s estate.

I am attaching some pictures for your review.

The weapon appears well kept, and in good condition.

I look forward to hearing from you.

Thanks!

Art Masoero
Attachment 108685Attachment 108687Attachment 108688Attachment 108686Attachment 108689Attachment 108690Attachment 108691Attachment 108692Attachment 108693Attachment 108694

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[bml]

It is a mixmaster of parts, the bolt sleeve is from a Smith Corona. Probably original barrel on the receiver. It is missing the front sight blade and stack swivel, indicating someone has pulled parts that aren’t normally needing to be pulled for normal maintenance or complete tear down.

Look at the bore condition, bolt face wear, cracks in the stock. And most importantly, look at the receiver around the cut off switch to see if it has removed welds or discoloration of the finish indicating welds. Might be a reclaimed drill rifle if the is evidence of welds.

If everything checks out it would be a 700-750 rifle with the missing parts around here. Not much more if the parts were there. If it was a drill rifle or poor condition parts I wouldn’t consider it unless using for parts and real cheap.