+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: Numrich let me down

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Contributing Member micmacman's Avatar
    Join Date
    Apr 2021
    Last On
    03-10-2024 @ 07:16 AM
    Location
    WV
    Posts
    173
    Local Date
    05-24-2024
    Local Time
    03:01 AM

    Numrich let me down

    ive been dealing with Numrich (Gun Parts Corp) for at least 25 years if not more and never have i felt like they left me holding a smelly bag until now

    bought a (as advertised) , "rear sight slide for 71/84 Mauser" , it arrived today and i open and its missing the lever assemble , the lever , spring , and hinge pin , so i call them and they said we sell those parts separately , well maybe you should put that important tidbit in the description , because its worthless without them

    then she says we are out of those parts ,i thinking yea , ya think? she says we can refund , so they charged me $9.00 for a padded first class envelope , now it will cost what ever for me to return, so if it does cost $9 then i go through all of this for $3 of the $31 dollars they charged to send me that non sense

  2. #2
    Legacy Member Fushigi Ojisan's Avatar
    Join Date
    Jul 2009
    Last On
    Today @ 12:30 AM
    Location
    Where the B&O and PRR cross in MD
    Posts
    84
    Local Date
    05-24-2024
    Local Time
    03:01 AM
    Never had it that bad, but sometimes getting parts is a crapshoot there


  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    Legacy Member Riter's Avatar
    Join Date
    Jan 2022
    Last On
    09-09-2023 @ 08:09 AM
    Location
    Coloradostan
    Posts
    77
    Real Name
    GY
    Local Date
    05-24-2024
    Local Time
    01:01 AM
    Bob Dunlap used to call them Numbnuts

  5. #4
    Contributing Member micmacman's Avatar
    Join Date
    Apr 2021
    Last On
    03-10-2024 @ 07:16 AM
    Location
    WV
    Posts
    173
    Local Date
    05-24-2024
    Local Time
    03:01 AM
    Thread Starter
    i am surprised , ive restored many a weapon with their parts over the years and have had nothing but high praise until this , , deceptive picture did not show a angle where the adjustment lever would be so it never even was a whiff it was incomplete , and entitled "Mauser 71/84 rear sight slide" , not incomplete sight slide

  6. #5
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Yesterday @ 08:00 AM
    Location
    Pennsylvania, United States
    Posts
    7,055
    Real Name
    Steve
    Local Date
    05-24-2024
    Local Time
    03:01 AM
    It is a crapshoot. I've gotten wrong parts off them 25% of the time I've ordered from them. Always too much effort and too much cost to correct them also. But there aren't many other sources so I keep going back.

  7. The Following 3 Members Say Thank You to Aragorn243 For This Useful Post:


  8. #6
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 11:52 PM
    Location
    Victoria BC
    Posts
    30,014
    Real Name
    Jim
    Local Date
    05-24-2024
    Local Time
    12:01 AM
    Agreed with the crapshoot. Years ago they were great but in the last 25 years not so much. Now we can't get anything across the border so not a problem but many here quit dealing with them years back.
    Regards, Jim

  9. The Following 2 Members Say Thank You to browningautorifle For This Useful Post:


  10. #7
    Contributing Member mmppres's Avatar
    Join Date
    Mar 2014
    Last On
    05-16-2024 @ 10:09 AM
    Location
    butler pa
    Age
    59
    Posts
    1,084
    Real Name
    mike
    Local Date
    05-24-2024
    Local Time
    03:01 AM
    They dont have many original parts left. They will not pay for stuff being sent to them either. The people who work there have no knowledge of older firearms. I have more people bring me parts lots that they tried to sell to that company an were told it was only worth a few dollars. Its mind numbing when i pay them some times hundreds of dollars for there stuff. I am not sure i have what you need. But will look if you want to pm me the info.

  11. The Following 2 Members Say Thank You to mmppres For This Useful Post:


  12. #8
    Contributing Member Low & Slow's Avatar
    Join Date
    May 2015
    Last On
    Yesterday @ 10:59 PM
    Location
    colorado usa
    Posts
    360
    Local Date
    05-24-2024
    Local Time
    01:01 AM
    Dealt with them off and on for decades. Always been a crap shoot. Once many, many years ago, I ordered up an extractor for a M1917, nothing at all rare at the time. They sent me one that was severely rusted, edges gone, and big holes through it. Looked like it had been dug up after spending twenty years buried in a muddy field. A single glance would have shown it to be absolutely useless for any purpose whatsoever. I couldn't believe that someone had actually hand picked that out of a bin, packed it up, and mailed it.
    The second one they shipped was fine. Of course, as the guys have said, I ate the hefty shipping and handling fees. Mostly, they've done better, but (obviously) that transaction still rankles.

  13. The Following 2 Members Say Thank You to Low & Slow For This Useful Post:


  14. #9
    Contributing Member micmacman's Avatar
    Join Date
    Apr 2021
    Last On
    03-10-2024 @ 07:16 AM
    Location
    WV
    Posts
    173
    Local Date
    05-24-2024
    Local Time
    03:01 AM
    Thread Starter
    Quote Originally Posted by mmppres View Post
    They dont have many original parts left. They will not pay for stuff being sent to them either. The people who work there have no knowledge of older firearms. I have more people bring me parts lots that they tried to sell to that company an were told it was only worth a few dollars. Its mind numbing when i pay them some times hundreds of dollars for there stuff. I am not sure i have what you need. But will look if you want to pm me the info.
    i always looking for a slide for a Gewehr 88 , the gew 88 and the 71/84 use the exact slide , i know the 88's are missing the rear sight slide allot of times and when ever i see one i grab it as long as it doesnt take a second mortgage , i appreciate the offer , its not holding up a resto or anything ,its one of those parts its nice to have in reserve ive brought more than a few 88's back from the dead

  15. Thank You to micmacman For This Useful Post:


  16. #10
    Contributing Member mmppres's Avatar
    Join Date
    Mar 2014
    Last On
    05-16-2024 @ 10:09 AM
    Location
    butler pa
    Age
    59
    Posts
    1,084
    Real Name
    mike
    Local Date
    05-24-2024
    Local Time
    03:01 AM
    I am heading out to a gun show but will look thru my stuff when i return. Just keep reminding me i forget alot. I just checked the gre 88 i put up for auction on gb an it doesnt have it on there.

  17. Thank You to mmppres For This Useful Post:


+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Ripped off by Numrich
    By danbailey in forum Commercial Auction and Sale "Gossip"
    Replies: 14
    Last Post: 04-17-2016, 08:33 PM
  2. Ripped off by Numrich
    By danbailey in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 12-01-2015, 08:14 AM
  3. numrich m1d kit?
    By xroads in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 05-12-2012, 06:22 PM
  4. Numrich 1903 SF .22 Conversion Kit??
    By Mike Haas in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 22
    Last Post: 12-27-2009, 03:35 PM
  5. numrich garand parts
    By garandfan1974 in forum M1 Garand/M14/M1A Rifles
    Replies: 6
    Last Post: 08-16-2009, 06:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts