T-Gewehr Mystery

[rescuerandy2]

Good Afternoon,

Trying to understand what is the purpose of some T-Gewehr's sights having a metal bar on their underside with a corresponding slot cut into the stock. Thanks, Randy

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

Looks like a lightening cut to me.

[rescuerandy2]

Hi Jim,

Please look at the other picture. You will see a bar below the sight tube that fits into that slot. What is the bar for?

Thanks,
Randy

[browningautorifle]

the other picture. You will see a bar below the sight tube

I see it now, looked different when I looked before. Is the sight base all one piece machined with the barrel? Is it part of the barrel? Or is is sweated or slipped on? If it's part of the barrel, it would fit into the barrel and action vise/wrench. If the sight was slipped on perhaps to help slide it on.

[Mark in Rochester]

As a guess, I would propose an alignment feature to set the rear sight base to the correct position. Dont believe it would be used as a surface to torque the barrel into place

[rescuerandy2]

Seems like this feature was added later in the series. My rifle is #265 and does not have the bar/slot. Thanks, Randy