artillery shell casing (calling browningautorifle)

[micmacman]

any ideas on this one , bought this maybe last winter ,it was painted gold , steel casing , very faint markings so i tried sanding the paint i put on in hopes it would act like back fill , looks like its says 30 CAL , tried googling but everything comes up brass

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Sapper740]

3" 50 cal.?

[micmacman]

3" 50 cal.?

dont know , measures 4 1/4 x 23 3/4 , looks like it says 30 CAL which makes zero sense , the other markings are extremely faint , only marking i think i missed was a D

---------- Post added at 01:55 PM ---------- Previous post was at 01:51 PM ----------

[browningautorifle]

I agree, a 3"50 cal. Nothing special...if you took some acetone and clean the paint off you'll see all the markings there clearly. I'll tell you what we were told about the steel in Canadian service...which was Navy only...steel is for training only and brass is for war. Since while those were in service on the last group of destroyers we were always training and never war you could see either.

Now, that being said, you can find US issue steel cases for most calibers from pistol to Howitzer and they used it everywhere.

You need a projectile now. Top row, fourth from right with dark blue projectile.

[CINDERS]

Looking good with the collection Jim.

Some older pics;

Pic #1 Some of my small stuff got about twice as much put away metrics, nitro's, mil spec ammo etc missing is a complete Aiden 30mm round.
(See if Jim recognises one case!)

Pic #2 the large gear that will be it now for me, as it is getting so damned expensive for cases or projies now my 106mm RCL HEAT round would fetch $650-700/Aud to get now.
I also have not pictured a brass 105mm Leopard 1 case very scarce one to acquire cost me an arm & half a leg that one!

[browningautorifle]

what to you use for a projectile , wood?

You could turn one out of a hardwood, maple easily enough and paint it. There's a guy in Seattle area that produces 3D printed projectiles if you search him. I have three of his.

if Jim recognises one case!

Yep, the 35mm...I had to make a projee for that one myself because some just won't ever turn up here. I had to do that with a 1.1" US Navy casing yesterday. I have two casings and I'll never find a projectile in Canada while one collector in the US had five or six complete rounds...not fair. Here's my cases followed by what they SHOULD look like.

[micmacman]

You could turn one out of a hardwood, maple easily enough and paint it. There's a guy in Seattle area that produces 3D printed projectiles if you search him. I have three of his.



Yep, the 35mm...I had to make a projee for that one myself because some just won't ever turn up here. I had to do that with a 1.1" US Navy casing yesterday. I have two casings and I'll never find a projectile in Canada while one collector in the US had five or six complete rounds...not fair. Here's my cases followed by what they SHOULD look like.

this one popped on FB Market today , but is a hour and a half away

[micmacman]

is the guy "Maker Steve"?

[browningautorifle]

"Maker Steve"

That is correct. There are others but his stuff looks pretty good and is about the right color. If I found a nice 90mm case here I'd get a projectile from him.

[micmacman]

this one turned up in Wv , i tried everything to make ot the markings , these were the best results , i gave up on it and just painted it green to get rid of that Bling Gold , what to you use for a projectile , wood? wish i had a 3D printer