+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 29

Thread: Anyone left behind...................

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2024 @ 05:01 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,569
    Real Name
    Peter Laidler
    Local Date
    11-01-2024
    Local Time
    02:05 AM

    Anyone left behind...................

    Just a quick one for the old CSPicon forumers on site. Apart from the one obvious highly regarded and literate subscriber, did we leave anyone of note behind on the old contaminated site?

    Kind thoughts to all over this Happy Easter weekend
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Deceased August 31st, 2020 englishman_ca's Avatar
    Join Date
    Oct 2006
    Last On
    08-15-2020 @ 07:19 AM
    Location
    Ontario
    Posts
    378
    Local Date
    10-31-2024
    Local Time
    09:05 PM
    Shhhh, they might hear you!

  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2024 @ 05:01 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,569
    Real Name
    Peter Laidler
    Local Date
    11-01-2024
    Local Time
    02:05 AM
    Thread Starter
    Nice side picture E in Ca! That's one bit of machinery that I NEVER tire of shooting. Sheer poetry in motion.........., the magnificent Bren

  5. #4
    Legacy Member krinko's Avatar
    Join Date
    Aug 2008
    Last On
    01-28-2024 @ 02:39 PM
    Location
    Omaha-ha-ha, Nebraska
    Posts
    337
    Local Date
    10-31-2024
    Local Time
    07:05 PM
    If you are going to make left handed remarks about my friend, I'm going to have to ask---Why do you want to start a fight?
    Hmmmmmmm?
    -----krinko
    Last edited by krinko; 07-05-2009 at 05:04 PM.

  6. #5
    Deceased August 31st, 2020 englishman_ca's Avatar
    Join Date
    Oct 2006
    Last On
    08-15-2020 @ 07:19 AM
    Location
    Ontario
    Posts
    378
    Local Date
    10-31-2024
    Local Time
    09:05 PM
    Holy smoke Krinko, and I thought that my Bren was hard on the wallet. With a toy like that it woudn't take long to blow a whole pay check! Or do you reload

  7. #6
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2024 @ 05:01 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,569
    Real Name
    Peter Laidler
    Local Date
    11-01-2024
    Local Time
    02:05 AM
    Thread Starter
    A) the matter never even entered my head Krinko and
    b) what exactly IS the thumbnail? Make, Calibre, Origin etc
    c) Is that you and your Bren E in Ca? Origin and Mark please? Not clear from photo.

  8. #7
    Deceased August 31st, 2020 englishman_ca's Avatar
    Join Date
    Oct 2006
    Last On
    08-15-2020 @ 07:19 AM
    Location
    Ontario
    Posts
    378
    Local Date
    10-31-2024
    Local Time
    09:05 PM

    Bren gun

    Quote Originally Posted by Peter Laidlericon View Post
    c) Is that you and your Bren E in Ca? Origin and Mark please? Not clear from photo.
    Yes, that is my happy face behind the Bren. The Bren was mine in as much it was mine to cherish and care for, to feed, to clean, to talk sweetly to whenever I had a stoppage.

    Pic was taken one spring morning at a WWII reenactment. What you cant see in the photo is the blood on my face. We got ambushed by Jerry as we came down a road ack-ack. So some ran left, some ran right. Me, I dove straight into the ditch at the side of the road cradling the Bren in front of me. That is one big frikin mag sticking up from the Bren. Mag and my nose met and I saw stars. Happy to report that the Bren suffered no damage whatsoever and the blood cleaned off it with a wet rag.

    The Bren is an early Inglis Mk.I with the dovetail on the left side for the indirect fire sight and is the property of the Museum of Applied Military History here in Ontario. Bren is 100%, select fire with a blank fire kit installed. We did our battle scheme that weekend on CF Base Borden training grounds which is of course a certified range for full auto. Woohoo!

    A mag doesnt last very long when things get exciting, so I had mags ready in my pouches, in my small pack, down the back of my pants the rest of the chaps in the section had mags shoved in their pockets and down the front of their battledress ready to pass over to me. All to feed the Bren.

    I have put ball rounds through it at a museum machine gun shoot and it is indeed a pleasure to shoot. The delay in lock time with an open bolt takes a bit of getting adjusted to, but I was suprised just how accurate it was using repetition. Fig 11 targets stood no chance.

    I own this one.

    Also a Mk.I made by Inglis (common as muck over here ). An on going project. Mostly complete now with all JI marked parts.

    In WWII they made them at the John Inglis washing machine factory on Brown's Line in Toronto, which is five minutes from the old Long Branch plant. I believe that they also made Browning Hi Power pistols.

  9. #8
    Legacy Member Paul S.'s Avatar
    Join Date
    Mar 2009
    Last On
    04-08-2020 @ 06:58 PM
    Location
    Back and forth between Sydney and Southern California
    Posts
    1,594
    Local Date
    10-31-2024
    Local Time
    08:05 PM
    I'm guessing but it looks to be a WWII vintage 20mm anti-aircraft Bofors (or is it Orlekin ???). How far wrong am I?

  10. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    cary m2a's Avatar
    Join Date
    Mar 2009
    Last On
    10-11-2009 @ 08:56 PM
    Location
    Pacific northwest U.S.A.
    Posts
    155
    Local Date
    10-31-2024
    Local Time
    06:05 PM
    You mean N!@#%*B ?

    Cary

  11. #10
    Administrator
    (CSP Forums)
    CSP ADMIN (Retired)'s Avatar
    Join Date
    Jan 2009
    Last On
    01-08-2009 @ 12:07 AM
    Posts
    68
    Local Date
    10-31-2024
    Local Time
    05:05 PM

    Exclamation

    Hello folks ....

    Just thought it might be a good idea to head off this thread before it started to drift toward an electronic lynching ...

    We're supposed to learn from history, so please let's leave the the old negative patterns on the old board and start new here with some fresh and positive relationships. It's a great time to shake hands and start over.

    Let's enjoy the hobby and each other, as well as try to remember that what we post to each other on the Internet, is often different than what we would say to the same person face to face, because it's easy to hide anonymously behind our keyboards.

    The moderators here have a low patience threshold for inappropriate and immature behavior, watching folks beat on each other for sport.

    So, we're asking everyone to please re-read the Welcome .... Please Read First! (click here) introductory post again carefully, particularly the part that relates to behavior and posting.

    If any one is really upset about a post and feel it's inappropriate to the rule set established by the Culvers, then please click on the small (triangle) you see in the bottom left corner of any post, which will permit you to report the post to our moderation team for action.

    Threads that get off track or too personal will be locked and folks may be removed from playing in the sandbox for a while ....

    Thanks for listening and cooperating.....
    Last edited by CSP ADMIN (Retired); 04-15-2009 at 05:35 AM.

  12. Thank You to CSP ADMIN (Retired) For This Useful Post:


+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Replies: 50
    Last Post: 03-03-2012, 02:17 PM
  2. M1 Carbine aims 3" left
    By bookbound in forum Gunsmithing for Old Milsurps
    Replies: 6
    Last Post: 06-18-2009, 03:07 PM
  3. Question for left handed K-31 shooters
    By Timmer in forum Gunsmithing for Old Milsurps
    Replies: 4
    Last Post: 03-26-2009, 12:55 PM
  4. best way to drift a rear sight to the left
    By skohler in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 6
    Last Post: 03-23-2009, 09:13 PM
  5. P17s left behind?
    By reddogge in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 8
    Last Post: 03-10-2009, 12:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts