-
Legacy Member
Longbranch No.5 MkI?
Dear Fellow Enfield Enthusiasts,
I was under the impression that all No.5 MkI "Jungle Carbines" were built by Fazackerly and BSA Shirley. I saw a Longbranch Jungle Carbine on GB which made me question my impression.
In other news, I sighted in my own No.5 MkI today at 50 yards off a bench rest - first time it's been fired since the mid-1970s. It bucked pretty much as I had remembered and shot well with perfect windage but seemed to shoot low. 3-shot groups under an inch has me encouraged. Shooting Privi Partizan 174 grain BTSP. Will back it up to 100 yards next week.
Cheers!
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
The Following 2 Members Say Thank You to aqbill For This Useful Post:
-
05-15-2014 05:51 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
I also thought that it was only those two manufacturers. Skennerton
lists only Fazakerley and BSA as manufacturers. Maybe it was a No4 converted or perhaps a trials rifle? Interesting find.
-
-
Legacy Member
It's a chop job.
Bubba with parts.
-
-
Legacy Member
Long Branch did a prototype No5 but if there is more than one is unknown
-
-
Legacy Member
You need to ask P L what was done in Maylasyia regarding No5 repair/rebuild.
-
-
We re-bodied them but only in Mk1 bodies but didn't chop the bodies about. This was simply to send out to the foreign armies/Pacific rim/Commonwealth nations using the facilities before the poms shut up shop in the Far East and it meant that less stuff was brought home. Fiji was a nation who we rebuilt tons of stuff for as I recall and the small Singapore Army
Last edited by Peter Laidler; 05-18-2014 at 04:33 AM.
-
Thank You to Peter Laidler For This Useful Post:
-
Advisory Panel
Perhaps this "rare" No.5 was separated at some time from the "super rare" cutaway magazine. Someone should spend foolishly and reunite the two. I am sure it will increase the value of the parts to $35 or $40. If not, there is always the nickel plating route to fame and fortune.
-
The Following 5 Members Say Thank You to breakeyp For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
It was quite common for some dodgy US companies to make "tanker" carbines and other bubbas as there is a price differential. So what you have seen is a fraudelent pass off. Now if you have got it for next to nothing, for fun, no biggee.
regards