My first Broomhandle think I did ok

[daytonlawvol]

Went in a store to purchase a different gun and came out with this in addition to my original purchase. I have identified as a postwar bolo. Paid $350...thoughts?











The only number that doesn't "match" is on a knob that pushes back and forth to the right of the sight ladder

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

Nothing wrong with that gun. Well used and honest. Is there anything left in the barrel?

[daytonlawvol]

Nothing wrong with that gun. Well used and honest. Is there anything left in the barrel?

Not much, will probably have it relined

[browningautorifle]

probably have it relined

Going to do a 9mm liner then? Or 7.62?

[daytonlawvol]

Going to do a 9mm liner then? Or 7.62?

Original 7.63

[browningautorifle]

Keep us in on that...would make for some good info later. Targets included of course. By the way, it may shoot great as is...

[AZPhil]

Not bad at all. You will need to find a rear site slide and the part" knob that pushes back and forth to the right of the sight ladder" is called the bolt stop. Ill have to look at my M1930 model to see if its marked with a serial number. It might be marked on the part that sticks into the receiver.

Semper Fi
Phil

[can14&]

I have one that has the map of the middle east stamped on it through proof marks. Got it in
Israel about 20 years ago. Also got a spare set of matching original grips and screw.

[HENRY B]

is the opening in the frame where the bolt stop rest bent? looks bent from bolt stop being slammed rear ward. i have 12 brooms and one of mine is bent.also own a schnell all of mine are red nines

[browningautorifle]

i have 12 brooms

You should do a simple layout and pics for us on those...don't forget the extra long mags and any other stuff lying around...