-
That's what I was getting at. Capacity within Nazi-occupied Europe for producing .303 ammo existed, but was any ever made? I've certainly neither heard of nor seen any.
-
-
12-09-2020 01:12 PM
# ADS
Friends and Sponsors
-
-
-
-
Legacy Member
The Germans certainly did produce ammunition in calibres to permit captured weapons to continue in use, although I've never seen nor even heard of 'Nazi 303' ammo. Would be most interested to know if it existed. There's nothing mentioned so far as I can recall in the late Peter Labbett's 'bible' on the .303, although I'll double check.
He certainly lists, about half a dozen French
ammo factories that made 303 ammo from WW1 until the late 30's, and they don't appear to have been making 7.92x57 ammo after a quick cross check with the known 7.92x57 ammo factories.
Labbett also list a pre-war Norwegian
303 ammo factory, which again would have come under German
control, which also doesn't appear on the 7.92 list, and Spain which was making 303 ammo during the civil war, which could have been a poss source as well.
Labbett lists DWM – Deutsche Waffen Und Munitionsfabrik, Karlsruhe as a 303 ammo maker as well.
So, there's certainly possible Wehrmacht 303 ammo sources.
Just the thing for putting round holes in square heads.
-
-
I agree, numerous possible sources, but has anyone ever seen anything? I think Promo is probably right in that, being a non-standard calibre, Enfields would have gone to rear echelon troops, or even into storage, & so would have been little fired, with captured ammunition stocks deemed sufficient, maybe?? I would imagine a lot of SAA would have been left behind on the beaches at & around Dunkirk.
-
-
Legacy Member
I think the question though, should be were any of those factories producing 303 during the war, or did they change over the production lines to other calibers? A machine making 303 could be easily switched to running other rifle cartridges. Were the occupied factories engaged in production of ammunition for 7.5mm or 8mm French
weapons? Or ammunition for the Italians? Were the machines shipped to Germany
to be run in a more loyal factory? My understanding is that the number of serviceable .303 rifles captured was very low, as many had been disabled by the expedient of breaking the striker and loosing the bolt head. Would the handful remaining have been worth making ammunition for in excess of what was captured?
-
-
Legacy Member
Ammo? Pick up the phone and place an order.
The FN plant in Belgium was tooled up to make LOTS of .303 ammo, much of it either for export or their own Lewis, etc guns.
The Italians also used the same round in a couple of their own MGs as well and made quite a lot of ammo for themselves and (pre-war) for export.
Not being used as front-line arms, captured .303 rifles (and MGs) would have initially been issued to second-line garrison troops or reasonably reliable auxiliaries or "allies".
They picked up few "Bren" Carriers during the Dunkirk Handicap. Enough to type-catalogue them and impress them into service as SP mounts for light anti-tank guns or, later, on the Russian
Front, as remotely-controlled demolition vehicles .
In the African Desert, The Australians and Kiwis ran the "Bush Artillery", pretty much completely equipped with captured Italian
guns and ammo.
The German
Ordnance system must have been really "interesting" by 1943, Ditto the Japanese
, who had few qualms about redistributing captured equipment and using it until it broke or ran out of ammo, fuel, etc. The Japanese Navy and their "Marines" were big users of their exact equivalent of the .303.
During the previous Great Unpleasantness, the Turks took possession of a LOT of British
and French
materiel. Their 7.92 x 57 conversions of SMLEs are a case in point: Use them for training with original captured ammo, then, as that dried up, totally rebuild them to use "standard" ammo..
-
-
Legacy Member
The same could be said of the British
as well, in reverse, as although we were making our own 7.92x57 ammo for our BESA MG's, use of captured German
ammo stocks was actually encouraged to supplement the small quantities of UK made 7.92 ammo supply, given the demand for 303 ammo for almost everything else.
It would be interesting to see any example of FN made 303 ammo with a 1941-1944 date stamp, which would likely be evidence they were making it for zee Germans.
Just the thing for putting round holes in square heads.
-
-
I used to be a keen collector of both 303 & 7.9mm ammo in my teens & twenties & I never heard of let alone saw any 303 cases/rounds with head stamps suggestive of production under Third Reich control. I know they had the capability to do it, as Bruce & others have pointed out.......but DID they? Does anyone have a 303 round head stamped ch 42, aux 43 or similar, or even rounds with civvy head stamps in a wrapper or box suggesting they were produced in a factory in Germany
or under German occupation? They could exist but I've never seen any evidence of it up to now. In fact it would be fascinating to be shown one.
-
-
Contributing Member
I can imagine it being worth there while to produce .303, if you have the rifles with ammo issue the a unit not expected to fire much, ok. However uk hardly want to complicate your supply line for something as cheap as bolt action rifle long term surely. Hence the point above about them going into store and being issued out to last ditch forces
-
-
Advisory Panel
There is a film of a German
battalion in WWI marching down a sunken road and all carrying SMLE's at the shoulder.
Last edited by Surpmil; 12-13-2020 at 11:34 PM.
“There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”
Edward Bernays, 1928
Much changes, much remains the same. 
-