Restocked and Rescoped my 03A3 Sporter:
It was already Sporterized when I got it.
Stock is a Boyds RIA Sporter, Black Pepper Laminate $69
Any normal person would have sent the Stock back to Boyds, Inletting was
Not even close <_<
Since I'm not normal, I deside it would be a good learning experiance to
attempt to finish the Inletting myself, What the Hay, I got a Dremel
It was alot of work but it came out really nice.
I Bedded the front & rear of the Action as well as the rear of the Floor Plate
and free floated the barrel.
Three coats of Tung oil, one coat of Carnuba wax and one coat of Bore Butter.
With this being my first real Inletting job, I am pleased with the outcome
Everything is snug but not over tight.
Scope is a Nikon 3-9X40BDC
Now if the Rain would stop, I could get to the range to see how it performs.
Also later I will Bed the front of the floor plate, or attempt to Pillar Bed it.

PS: Thanks for everyones help here, on this and on my Not Sporterized 03A3.











Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.