perhaps some one could help me with a problem. I was given a nice looking lee enfield. To make a long story short it shot terrible. 6 inches hi first shot, then straight down a foot at 50 yards. I suspected a bedding problem. Sure enough the entire barrel was epoxied to the stock. The worst job I ever saw. With patience and skill I was able to take it a part and remove the the epoxy. The stock is still in tack except the mid band screw and spring area around the stock. I know there are Brits or Aussies here who could help me with bedding. I find bits and pieces on the internet but some times conflicting info because of the various models. There is info about cork, free floating then not free floating, touching here and there. Any info or links would be apreciated. Don from Joshua Tree
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.