The model 27 and 28 rifles have a very odd front sight design - - the blade
dovetaii is transverse but is carried in a longitudinal sight holder that slides out to the front when its setscrew is removed. (it might also slide to the rear but I didn't try it.)I installed a tall Mauser front sight from Brownells, which I will have to file down once I get to the range. In order to install I had to file a new dovetail on the Brownell sight with a triangular file, and narrow the edges, which was easily done with a mill file. The new sight was a tight fit in the stock dovetail, which is what I wanted. What I discovered is that my Swissicon sight adjusting tool (not the real Swiss Army one - that won't work this way) will work to make fine lateral adjustments of the Brownell sight blade. The adjuster is only $15 on eBay and the auction number is 280291052390. It is a "$buy it now" no bidding item, but a very worthwhile tool for adjusting K 31 sights and now for adjusting M 27 and 28 sights. By the way, Possum Hollow bore guides for enfields work very will in Mosin Nagants, if Eric has not yet put up the Mosins for sale on his site yet. best, Kari
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.