removal and dissasembly of the bolt for 1917 and P14

[Chuckindenver]

Attachment 30312Attachment 30313Attachment 30314Attachment 30315pictures are a little crappy, hard to take pictures and hold parts at the same time.
to remove the bolt assembly...pull the bolt back, left the bolt latch on the left side out, then pull the bolt clear of the action.
to remove the cocking assembly, catch the sear engagement on a sharp edge, table, ect, then pull down on the bolt sleeve, instert a penny, nickle or washer in the gap, then rotate out as shown.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.