I had taken my gun to the range a week ago. I loaded up some bullets 110 grain and they were fine. I was shooting about 2 inches high at 100 yds. I took the same gun to the range and the bullets were flying about 5 feet or more high at 200 yards. I am useing H414 57 gr with a COL of 3.030 the max listed was 3.170, the starting load I used of 57gr shows a velocity of 3044fps. It was the same bullets, powder and load I used before and got three shot groups at 100 yds of 2 inches. After I could not print at 100 yds on paper I removed the bolt and did a bore sight and it was on center of paper for a bore sighting. Tried it again and same thing hitting several feet high. I am not sure what is going on, any help would be appreciated.
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.