Results 1 to 10 of 309

Thread: 54R Bren Issues

Thread Tools
Search Thread
- Advanced Search
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

djandj 54R Bren Issues 02-27-2015, 06:43 PM

browningautorifle He's chambered an existing... 02-27-2015, 07:46 PM

djandj Can anything be done? Or can... 02-27-2015, 08:38 PM

browningautorifle As in adding on to the back? ... 02-27-2015, 10:05 PM

djandj Thanks Jim. Builder just... 02-27-2015, 10:28 PM

browningautorifle He is. It's the sort of... 02-27-2015, 11:56 PM

Bruce_in_Oz That's pretty ugly right... 02-28-2015, 03:22 AM

Joe H Guys, I converted a MKII... 02-28-2015, 09:42 AM

Peter Laidler My only experience with an... 02-28-2015, 09:21 AM

djandj Thanks Peter. The entire... 02-28-2015, 11:24 AM

Peter Laidler Just a couple of things -... 02-28-2015, 12:27 PM

browningautorifle Good pics Joe. Very clear... 02-28-2015, 12:28 PM

Peter Laidler I hope I've explained why... 02-28-2015, 12:35 PM

Joe H Guys, If you look at the... 02-28-2015, 01:50 PM

Peter Laidler I.m not familiar with the... 03-01-2015, 06:59 AM

djandj Thanks for all the help guys.... 03-01-2015, 12:55 PM

Joe H DJANDJ--- Unless you... 03-02-2015, 07:38 PM

djandj Thanks Joe. I sent the... 03-03-2015, 08:02 PM

Peter Laidler I can't offer any more... 03-01-2015, 01:28 PM

Vincent https://www.milsurps.com/image... 03-02-2015, 08:46 PM

Joe H Vincent, I believe the Mag... 03-03-2015, 09:28 AM

djandj That is a ZB 39 mag and yes... 03-03-2015, 07:39 PM

Joe H ZB 39 Magazine Capacity 04-29-2015, 09:21 AM

browningautorifle I'd think he'd need the... 03-03-2015, 08:26 PM

Joe H BAR is dead on. For the Bren... 03-04-2015, 07:36 AM

csmarcher To be honest shooting 54r in... 03-04-2015, 01:19 AM

djandj A "few bucks"??? 54R is .22... 03-04-2015, 07:56 PM

Vincent Yeah! That’s why I want a 54R... 03-05-2015, 10:38 AM

djandj Sorry - no help with the... 03-05-2015, 11:50 PM

csmarcher But if the ammo is sh*t and... 03-08-2015, 11:53 PM

djandj Many others have successfully... 03-09-2015, 10:32 AM

Bruce_in_Oz The other problem with the... 03-04-2015, 01:21 AM

Peter Laidler Does anyone KNOW the... 03-04-2015, 03:43 AM

Peter Laidler One problem that used to... 03-04-2015, 10:30 AM

Joe H Peter, I encountered this... 03-04-2015, 01:59 PM

Peter Laidler Appreciate your comments Joe.... 03-04-2015, 05:30 PM

Peter Laidler Why the need for ZB39... 03-06-2015, 05:16 AM

Brit plumber ZB39 mags are cheap in the UK... 03-06-2015, 06:38 AM

Peter Laidler And so they might be (BP,... 03-06-2015, 08:21 AM

djandj Yep - it's the curvature of... 03-07-2015, 01:42 PM

desperatedan You could try these guys but... 03-08-2015, 12:14 PM

TactAdv Typically, from the ITAR/AECA... 03-09-2015, 12:07 PM

Vincent Joe H is the man to answer... 03-06-2015, 10:50 PM

Peter Laidler Ah, yes I remember the thread... 03-07-2015, 12:53 PM

Brian Dick Bren butt slides. Imagine... 03-07-2015, 01:08 PM

Peter Laidler I am more than convinced that... 03-09-2015, 11:09 AM

djandj Peter - you may be right. As... 03-09-2015, 05:51 PM

Peter Laidler ON that basis, needy US... 03-09-2015, 12:35 PM

djandj OK so now the "explosive... 04-27-2015, 02:04 PM

Joe H Djandj, I know I can't... 04-27-2015, 05:38 PM

Joe H Djandj, Here is a simple... 04-27-2015, 06:28 PM

Joe H Djandj, Is this what is... 05-03-2015, 07:43 AM

djandj Thanks Joe. As you can... 05-03-2015, 02:16 PM

CINDERS Rim drag mark! 04-29-2015, 02:30 AM

djandj Joe - THANK YOU for your help... 04-27-2015, 10:45 PM

djandj OK Disregard the locking... 04-28-2015, 12:11 AM

tankhunter Feeler Gauges should be... 04-28-2015, 02:48 AM

Peter Laidler If I can just chip-in here... 04-28-2015, 05:54 AM

Joe H Peter, Regarding your... 04-28-2015, 08:00 AM

Peter Laidler I'm going to the US next... 04-28-2015, 01:38 PM

djandj OK Guys. Feeler gauges... 04-28-2015, 04:16 PM

Joe H djandj, Magazine issues???... 04-29-2015, 07:02 AM

Brian Dick I don't have any semi-auto... 04-28-2015, 05:15 PM

WallyG. Brian: If you wish... I... 04-28-2015, 07:17 PM

Joe H Brian, Where in Pa? I'm in... 04-28-2015, 09:03 PM

Vincent Brian, I agree that Wise Lite... 04-28-2015, 08:19 PM

Vincent What happens if you only load... 04-29-2015, 04:20 AM

Brit plumber On a semi, what stops the... 04-29-2015, 06:18 AM

Joe H Semi-auto bren striker 04-29-2015, 07:45 AM

Brian Dick Harrisburg, PA. 04-29-2015, 09:50 AM

Peter Laidler That is an ingenious way of... 04-29-2015, 10:19 AM

Joe H Peter, I started building... 04-29-2015, 10:53 AM

Vincent 62355 The striker is from... 04-29-2015, 11:41 AM

Joe H Vincent, What are the... 04-29-2015, 02:02 PM

Peter Laidler The actual un-machined block... 04-29-2015, 01:42 PM

TactAdv .....after a few beers in the... 04-29-2015, 05:36 PM

djandj Hey guys, I'd be happy if you... 04-30-2015, 12:29 AM

Peter Laidler DU....... there's a thought! 04-29-2015, 06:11 PM

Vincent I am game, Peter. Double game... 04-29-2015, 06:48 PM

WallyG. The striker and carrier... 04-29-2015, 07:45 PM

csmarcher The biggest problem is crap... 04-30-2015, 02:39 AM

djandj With all due respect CS, my... 04-30-2015, 08:57 PM

Peter Laidler Yet another few succinct... 04-30-2015, 04:32 AM

Joe H Peter, I'll drink to your... 04-30-2015, 07:44 AM

Vincent I wish you would stop doing... 04-30-2015, 09:46 AM

Peter Laidler We had a tacit sort of agreed... 04-30-2015, 09:50 AM

Peter Laidler We can all see the... 05-01-2015, 04:57 AM

djandj Yes Peter, quite true that... 05-01-2015, 11:02 AM

Vincent Being a layman, I had to look... 05-01-2015, 08:49 AM

Peter Laidler Ah, yes, that's the point we... 05-01-2015, 11:31 AM

Joe H Djandj, This, I know is... 05-01-2015, 01:46 PM

csmarcher Joe I'm actually a very... 05-01-2015, 02:03 PM

Joe H Gary, You have two:clap: I... 05-01-2015, 03:23 PM

djandj Great Idea Joe. I just got... 05-01-2015, 05:57 PM

djandj The Big Update 05-01-2015, 09:22 PM

tankhunter If the head space is too... 05-02-2015, 03:25 AM

Peter Laidler When the breech block is... 05-02-2015, 09:11 AM

djandj Thank you Peter I think I... 05-02-2015, 10:31 AM

WallyG. Do heed the experts... but... 05-02-2015, 11:19 AM

WallyG. Related Question: BRP also... 05-02-2015, 11:31 AM

Joe H djandj, From your... 05-02-2015, 01:12 PM

djandj Thank you Joe and Peter. I... 05-02-2015, 01:40 PM

ActionYobbo before you go grinding and... 05-02-2015, 04:23 PM

djandj As for HS - I did it with and... 05-02-2015, 05:40 PM

More replies below current depth...

MGMike What leaps out at me is the... 05-02-2015, 11:29 PM

djandj Mike, the casing are steel... 05-02-2015, 11:35 PM

Peter Laidler Whoooooooa lads....... Let... 05-03-2015, 08:57 AM

WallyG. If I'm understanding this... 05-03-2015, 10:33 AM

ActionYobbo the described blow out was at... 05-03-2015, 11:00 AM

Joe H Peter, Every head spacing... 05-03-2015, 11:52 AM

djandj Thanks Peter. I checked... 05-03-2015, 02:35 PM

Vincent Not quite. A .303 bolt would... 05-03-2015, 11:48 AM

Peter Laidler Nope...... the massive... 05-03-2015, 11:51 AM

Vincent What's the next step(s)? A... 05-03-2015, 07:07 PM

Joe H Djandj, As I see it,... 05-03-2015, 08:21 PM

djandj Thanks Joe - definitely along... 05-03-2015, 08:44 PM

Joe H dandj, Check your PM's.... 05-04-2015, 08:41 AM

Vincent 62429 What is this? 05-04-2015, 08:56 AM

ActionYobbo good eyes what is that? ... 05-04-2015, 08:32 PM

djandj I was using blue painter's... 05-04-2015, 10:58 PM

Peter Laidler Several years ago Dan Shea... 05-04-2015, 01:41 PM

Brian Dick We should do one here in... 05-04-2015, 08:02 PM

Peter Laidler We used to tests like that... 05-05-2015, 06:38 AM

djandj OK Having spoken to several... 05-05-2015, 05:46 PM

djandj Ok Gang - I took out the... 05-06-2015, 04:03 PM

Peter Laidler Don't do anything yet DJ as I... 05-06-2015, 05:40 PM

ActionYobbo was this what you were... 05-06-2015, 06:27 PM

djandj Thanks Mr. E. Nothing close... 05-07-2015, 12:27 AM

TactAdv IMHO, it is FAR easier to... 05-07-2015, 11:32 AM

djandj Thanks guys. I do want to... 05-07-2015, 07:25 PM

WallyG. It will not be a sure... 05-07-2015, 07:49 PM

Joe H Djandj, Just do it... 05-08-2015, 08:52 AM

Joe H Tom, To make a longer LS I... 05-08-2015, 08:00 AM

TactAdv Joe, Yes on the bolt weld.... 05-08-2015, 04:00 PM

Joe H Thanks Tom for the Heads Up... 05-09-2015, 07:09 AM

csmarcher Try going out and buying 100... 05-07-2015, 02:34 AM

Peter Laidler That was it MrE. I knew I'd... 05-07-2015, 04:04 AM

Joe H I know some have concerns... 05-07-2015, 07:15 AM

Vincent I was told the Historic Arms... 05-07-2015, 07:25 AM

Joe H Dandj, Removing .004-.005"... 05-07-2015, 08:15 AM

Peter Laidler We used what we called 'three... 05-07-2015, 09:01 AM

Vincent Ah! I forgot about the larger... 05-07-2015, 09:35 AM

Peter Laidler Aside a bit DJ and your... 05-08-2015, 05:29 AM

jmoore Near as I can reference... 05-08-2015, 06:08 AM

Joe H I think a brass case is... 05-08-2015, 09:10 AM

Vincent :thup: And it helps the case... 05-08-2015, 10:33 AM

browningautorifle I never thought of steel as... 05-08-2015, 11:40 AM

Peter Laidler That's a very valid point... 05-08-2015, 03:00 PM

djandj Thanks Peter. As far as the... 05-08-2015, 05:13 PM

Bruce_in_Oz Steel is CHEAPER as a... 05-10-2015, 04:35 AM

Vincent Those are stick welder... 05-08-2015, 05:21 PM

TactAdv Yup, Mea Culpa. I just quick... 05-08-2015, 10:00 PM

djandj OK gang - while I am awaiting... 05-09-2015, 11:17 AM

Peter Laidler When you're putting the LS... 05-09-2015, 12:23 PM

djandj Thanks Peter. We'll see how... 05-09-2015, 11:20 PM

Vincent Have you compared the Super... 05-09-2015, 12:38 PM

Vincent Good points. But I think... 05-10-2015, 06:41 AM

Brian Dick I have .45 ACP and .30 M1... 05-10-2015, 02:02 PM

Peter Laidler Sorry to say but I can't see... 05-10-2015, 02:59 PM

Brian Dick No, I agree with that logic... 05-10-2015, 03:24 PM

jmoore Steel .45 cases have always... 05-11-2015, 03:05 AM

csmarcher 17 pages and still going. Is... 05-13-2015, 07:16 PM

browningautorifle Change your settings...you'll... 05-14-2015, 10:02 AM

Peter Laidler I have to say that it's been... 05-14-2015, 04:07 AM

Bruce_in_Oz My story regarding... 05-14-2015, 08:23 PM

TactAdv What your looking for is what... 05-16-2015, 12:27 PM

browningautorifle Would make the reamer produce... 05-16-2015, 01:29 PM

TactAdv But not in the correct... 05-16-2015, 02:41 PM

Vincent This marvel of engineering... 05-15-2015, 11:19 AM

Joe H 6262562626 IMO Vincent is... 05-15-2015, 12:18 PM

Joe H Djandj, I guess your trip... 05-18-2015, 07:09 AM

ActionYobbo just pointing out that the... 05-18-2015, 07:40 AM

djandj Thanks Joe. No I haven't... 05-19-2015, 12:00 AM

Joe H Djandj, No matter how you... 05-19-2015, 07:48 AM

browningautorifle Whatever you think... 05-16-2015, 02:51 PM

TactAdv 'BAR', I would agree with... 05-16-2015, 06:14 PM

Joe H I don't think there is a... 05-17-2015, 07:16 AM

djandj Update ! Update! 05-17-2015, 10:36 PM

Peter Laidler Maybe we shopuld cross... 05-17-2015, 05:56 AM

Peter Laidler It seems to me that with the... 05-18-2015, 03:51 AM

browningautorifle Why not just section several... 05-18-2015, 11:22 AM

Peter Laidler JUst been reading and... 05-21-2015, 04:38 AM

Joe H Peter, Here is why I think... 05-21-2015, 07:39 AM

TactAdv We agree totally, Joe! Your 2... 05-21-2015, 12:12 PM

Vincent I thought the Yugo brass case... 05-21-2015, 11:40 AM

djandj Vince - that was the STEEL I... 05-22-2015, 05:13 PM

djandj OK - so.... I'm still lost. ... 05-22-2015, 05:37 PM

Peter Laidler Please tell me if I'm barking... 05-21-2015, 01:33 PM

Joe H Peter, Your statement... 05-21-2015, 03:59 PM

Vincent Peter, I think you nailed... 05-21-2015, 03:17 PM

TactAdv Well, you could conceivably... 05-21-2015, 03:31 PM

Vincent I understand those issues,... 05-21-2015, 04:57 PM

Joe H Vincent, Additionally... 05-21-2015, 08:18 PM

djandj Joe - just to eliminate the... 05-22-2015, 05:25 PM

Vincent Good point, Joe. He could... 05-21-2015, 09:17 PM

WallyG. In what dimension are you... 05-21-2015, 10:23 PM

Vincent I am not reporting it, other... 05-22-2015, 12:16 AM

Peter Laidler I would just ask you to oil... 05-22-2015, 05:47 PM

djandj Will DO! Thanks Peter. 05-22-2015, 06:34 PM

Joe H Djandj, Exactly what are... 05-23-2015, 09:15 AM

djandj You are absolutely correct... 05-23-2015, 06:09 PM

Joe H Thanks tankhunter:thup: for... 05-24-2015, 07:11 AM

Vincent I would ask you to over... 05-23-2015, 09:56 AM

Peter Laidler The only reason I suggest... 05-23-2015, 12:05 PM

ActionYobbo back to basics if the head... 05-23-2015, 12:37 PM

Joe H Mr E. :thup:, Exactly... 05-23-2015, 04:41 PM

Vincent 62903 Want to try this one? 05-23-2015, 02:30 PM

djandj Thank you Vince. PM sent. ... 05-23-2015, 05:43 PM

Vincent Some of the members here have... 05-23-2015, 06:45 PM

ActionYobbo good job there... 05-23-2015, 08:07 PM

More replies below current depth...

Vincent Peter makes a very good... 05-23-2015, 02:53 PM

Vincent His carrier only has one... 05-23-2015, 03:29 PM

Vincent 62938 Here’s another thing... 05-24-2015, 10:45 AM

djandj Thanks Vince. If I remember... 05-24-2015, 08:13 PM

ActionYobbo its a dangerous practice to... 05-24-2015, 09:20 PM

djandj NOW you tell me Mr.E! (lol) ... 05-24-2015, 10:57 PM

tankhunter Military Proofing is: One... 05-25-2015, 01:59 AM

Peter Laidler At last...... DJ, now we... 05-25-2015, 04:18 AM

Joe H Djandj, I'm glad you are... 05-25-2015, 09:14 AM

djandj Right with you Joe! Head... 05-25-2015, 05:33 PM

tankhunter As I said. If you start from... 05-26-2015, 02:46 AM

Peter Laidler I see the point you're making... 05-26-2015, 05:23 AM

Joe H Peter, Excellent point. I... 05-26-2015, 07:45 AM

Peter Laidler Give us Brits a bit of slack... 05-26-2015, 08:12 AM

Joe H Peter, You guys don't need... 05-26-2015, 09:05 AM

tankhunter Yes, it's quite difficult,... 05-27-2015, 02:55 AM

Vincent That’s a good question. The... 05-28-2015, 10:11 AM

Vincent 63182 Is it normal for... 06-02-2015, 04:26 PM

Peter Laidler I didn't know they had... 06-02-2015, 05:31 PM

Vincent The one I sent is .006"... 06-02-2015, 06:56 PM

djandj Yep. Vincent is the... 06-02-2015, 11:28 PM

Peter Laidler .006"...........! That's got... 06-03-2015, 04:31 AM

Vincent Yes. I wonder if it has... 06-03-2015, 09:33 AM

Peter Laidler Nope...... got a live gun... 06-03-2015, 09:58 AM

Joe H To make the my point in the... 06-03-2015, 10:54 AM

Joe H Guys, Unfortunately we are... 06-03-2015, 10:47 AM

Vincent Thank you, Peter. I will... 06-03-2015, 10:57 AM

Vincent It’s not difficult to machine... 06-03-2015, 11:35 AM

djandj OK a few extra pics at... 06-04-2015, 12:04 AM

Peter Laidler I am sup[rised that your US... 06-04-2015, 03:40 AM

Vincent It’s not against the rules.... 06-04-2015, 01:24 PM

Vincent 63227 Thanks, Joe. That's... 06-04-2015, 01:29 PM

Vincent Great pictures, djandj. Are... 06-04-2015, 05:13 PM

djandj Thanks Vince. The pics above... 06-04-2015, 10:49 PM

Vincent With no round in the chamber... 06-05-2015, 03:11 PM

djandj OK Gang; I installed Vince's... 06-06-2015, 04:27 PM

Vincent I guess that is with a round... 06-06-2015, 06:17 PM

djandj NEW UPDATE. Took the Bren to... 06-07-2015, 09:58 PM

AmEngRifles Agreed observation 06-08-2015, 12:15 AM

djandj Thanks AM. The whole point... 06-08-2015, 10:36 AM

Vincent Let us know how the test with... 06-07-2015, 11:56 PM

Vincent Before you buy a HA Bren talk... 06-08-2015, 08:54 AM

Vincent 63271 The barrel on the... 06-08-2015, 03:01 PM

djandj GREAT! Will you tell that to... 06-09-2015, 10:40 PM

Vincent 63273 By the way, it’s... 06-08-2015, 03:43 PM

djandj Yes, Vince I used the... 06-09-2015, 10:52 PM

AmEngRifles djandj, Might respectfully... 06-09-2015, 11:00 PM

browningautorifle I think you can get the ream... 06-09-2015, 11:03 PM

AmEngRifles Barrel source 06-10-2015, 12:04 AM

Peter Laidler The problem with carrying... 06-08-2015, 05:51 PM

browningautorifle They seem to have a bit of... 06-10-2015, 12:07 AM

Vincent Yes, I will tell the builder... 06-10-2015, 12:08 AM

Peter Laidler I agree with BAR (thread... 06-10-2015, 04:44 AM

djandj Yep. Which makes it all the... 06-10-2015, 04:44 PM

TactAdv Have you thought to measure... 06-10-2015, 04:52 PM

Joe H Djandj, You still don't... 06-10-2015, 06:01 PM

djandj Joe - I'm with you. I'm... 06-10-2015, 11:15 PM

More replies below current depth...

browningautorifle I've been watching this since... 06-10-2015, 11:00 AM

Joe H AMEN --- Gunsmithing 101 ,... 06-10-2015, 03:22 PM

Peter Laidler Surely chaps........... if... 06-13-2015, 04:27 AM

djandj Final update 06-14-2015, 08:19 PM

Peter Laidler Don't know about the reaming... 06-15-2015, 12:38 PM

djandj Peter, what barrel do I have... 06-15-2015, 02:17 PM

Vincent I can ream another barrel.... 06-16-2015, 05:33 AM

Peter Laidler To be honest I can't see the... 06-15-2015, 07:21 PM

djandj Thanks Peter, I suppose it... 06-15-2015, 10:06 PM

djandj Thanks Vince. I will order a... 06-16-2015, 10:55 AM

browningautorifle Why not just send them... 06-16-2015, 12:05 PM

WallyG. Not to rain on the... 06-16-2015, 02:55 PM

djandj Quite True Wally. But... 06-17-2015, 11:54 PM

Vincent It's a real possibility that... 06-17-2015, 10:51 AM

Vincent :lol: Vastly! :lol: The... 06-18-2015, 03:55 AM

Vincent A few pictures of the new... 08-12-2015, 05:49 PM

ActionYobbo is that the barrel you got... 08-12-2015, 06:54 PM

Vincent No. He sent it to me to... 08-12-2015, 07:26 PM

Vincent Here's better pictures of the... 08-13-2015, 03:14 PM

Peter Laidler That's a blxxxx good job of... 08-13-2015, 04:53 PM

ActionYobbo I am always amazed by the... 08-13-2015, 07:01 PM

Vincent Thank you, Peter. Coming from... 08-13-2015, 05:10 PM

Peter Laidler We always painted them... 08-14-2015, 04:12 AM

bigduke6 What recipe are you using... 08-14-2015, 07:44 PM

Vincent It’s from a local chemical... 08-14-2015, 11:24 PM

bigduke6 Using Just a home-brew, but... 08-15-2015, 01:22 PM

Vincent There needs to be some iron... 08-15-2015, 07:54 PM

browningautorifle We used to have to strain our... 08-14-2015, 11:35 PM

Vincent Did you ever do zinc... 08-15-2015, 10:25 AM

browningautorifle We were using the Brownell's... 08-15-2015, 11:42 AM

Vincent Oxynate 84 is for bluing. 08-15-2015, 12:01 PM

browningautorifle Right, we were using... 08-15-2015, 12:56 PM

Vincent Yes. It's manganese phosphate. 08-15-2015, 04:10 PM

06-18-2015 03:55 AM #21
Vincent

View Profile

View Forum Posts

Private Message

View Articles
Legacy Member

Join Date

Mar 2009

Last On
02-27-2020 @ 09:22 PM

Location

Texas

Posts

1,890

Local Date

05-28-2025

Local Time

10:54 PM
Vastly!

The good news is we now know the gun will run without blowouts.
Top PM Register To Reply

Quick Navigation The Bren LMG (Light Machine Gun) Top

« Previous Thread | Next Thread »

Similar Threads

Bren parts kit and Book 'The Bren Gun Saga" by Dugleby

By colfi in forum The Bren LMG (Light Machine Gun)

Replies: 11
Last Post: 12-18-2015, 10:42 PM
Bren Mk 2 Recoil Spring Issues

By djandj in forum The Bren LMG (Light Machine Gun)

Replies: 40
Last Post: 06-05-2014, 04:27 PM
Why do the Bren Mk3 and Bren MkII rear sights have the same part number?

By Lee Enfield in forum The Bren LMG (Light Machine Gun)

Replies: 1
Last Post: 06-26-2012, 03:03 PM
Just a snippet of Bren info for you Bren fiends............

By Peter Laidler in forum The Bren LMG (Light Machine Gun)

Replies: 21
Last Post: 08-15-2010, 11:57 AM
Bren Parts Set/Display Gun and a South African Bren

By epidoc in forum The Bren LMG (Light Machine Gun)

Replies: 3
Last Post: 04-05-2010, 12:19 PM

Tags for this Thread

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Rules & Site User Agreement

All times are GMT -4. The time now is 12:54 AM.
Powered by vBulletin™
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Username Changing provided by Username Change (Free) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Thread / Post Bookmarks provided by Thread / Post Bookmarking (Free) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Copyright ©2006 - 2024 by MILSURPS.COM - All Rights Reserved

Your IP Address: 18.191.174.190 | OS: unknown | Browser: Mozilla 5.0