Quote Originally Posted by jsne View Post
First you need to measure out how mutch you need to lower the
Spigot on the front pad:
Put the rifle or barel/action to exat straight level
Using a Spirit Level (buble thing) on the front barrel over the bayonet
Lugs.
Put your scope in the bracked and mount it tight in the front Pad.
Now with the rear thumpscrew removed insert the rear pad between
The bracket an action body
Now place the Spirit Level on the front tube of the scope.
Use a set of feeler gauges in the gab under the rear pad
Until the scope is lewel with the rifle.
The thicknes of the numbers of your feeler gauges is what you need to lower the Spigot on the front pad.
Lk
In Peter Laidlers book about the story of thr no.4 t
He explain how do repair a worrn out Spigot
It is exactly the same I doo but with an exentric bushing with the center
Iowered to what you need.
I have the book and can scan the side to you.&

But I think wee need Peters permission to copy anything
From his book
So Peter if you read this? Will it be Ok?

jsne

The rest will folow in s cuppel og days
I have the book, no worries, I will check. thank you jsne