Hi SG5054,

The best thing is to start with an single stage press. You could reload an .223 with an multi stage press but an 8 mm and the old 30-06 would destroy your multi stage press.
You should also invest in an good powder dispenser (RCBS) and in equipment to load the primer, RCBS has an very easy to use press mounted priming tool.
You will also need an powder scale and an good dies-set. I would also recommend RCBS.
In all RCBS is an little expensive but worth the buck.
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.