Quote Originally Posted by Jim Tarletonicon View Post
I forgot to add that if you want to go the whole nine yards (anyone know the origin of that expression?), you can coat all polished cam and sear surfaces with Gun Juice and put them in a 250F oven for twenty minutes. Be prepared for a drastic change, and you might not like it.

I Gun Juice my barrels for longevity, and Gun Juice will raise POI at 100 yards significantly. I had to change out the front sight for a taller one on a 38-55 Marlin after Gun Juicing the barrel. The POI at 100 yards went up 12 ". Typical change in POI after Gun Juicing is on the order of 3" to 6" rise, depending on rifle and caliber. I have personally detected no increase in accuracy with Gun Juice. Others say differently.

Jim
I juiced my bolt per your instructions then slid it, hot, into the juiced receiver. The action is even smoother now. I used a piece from a ceramic knife sharpener to polish the sear a little bit more. The trigger pull is smoother and crisper, as you said it would be. Thanks for the tip. Will be juicing the barrel once I get the copper fouling out. Just ordered some KG-12 for that job.