-
Legacy Member
How to zero the No32Mk3 Scope
Hello everyone
I have a minty 1944 M47C No4Mk1T but I need to zero the scope (No32Mk3). I don't want to barge in and start making assumptions.
So with that in mind how do I best educate myself on this subject? Currently walking on egg shells. Bracket is serialed to the rifle.
Richard
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Last edited by Riflechair; 06-09-2010 at 01:57 PM.
-
-
06-09-2010 01:53 PM
# ADS
Friends and Sponsors
-
BDL
sells a little book about them and I believe that it's in there. Treat yourself..................
-
-
-
Deceased January 15th, 2016
BDL
sells a little book about them and I believe that it's in there. Treat yourself..................
Good Call Peter.
-
Legacy Member
OK I picked it up from Brian
Cheeky Monkey
-
-
As I have zeroed in one or two No32's in my time, maybe I ought to do a short article about it. The problem is that you can very easily come unstuck, especially with the Mk3/L1A1 if the unwary unwind ..... and unwind until the lead screw nut drops off the leadscrew...............
-
The Following 3 Members Say Thank You to Peter Laidler For This Useful Post: