1903 Springfield Rebuild Questions

[Midmichigun]

John,
Thanks for the prompt reply. I am going to attempt to upload some images, so here it goes!
First pic is the receiver and serial number:

Side view of the stock and receiver area:

As mentioned, I don't see alot of cartouches (externally) on the stock. When I took it apart, this is what I found:


The buttstock has some incised and white "rack numbers" on it:


The rear swivel doesn't have an "R" on it, for Remington. I don't know if this is natural!

The magwell and triggerguard:

I will post more later. I have cleaned up the stock a bit. I used an iron to steam off some of the dents, and then I degreased the wood. Several coats of tung oil, and the rifle looks better!

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.