Bolt Parts

**rocky321** · 11-08-2010 04:05 PM

Just disassembled my bolt with the tool from Gun Parts. Worked perfectly. The extractor plunger has "half" a head. Is this correct? Also the very tip is slightly flattened. Should I just replace it? And would you suggest replacing any other parts/springs while its disassembled?

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 11-08-2010 04:05 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**ScottR** · 11-08-2010 05:36 PM

When you assemble the bolt the plunger flat MUST rest on the extractor shelf for the bolt to work properly. If your bolt was working properly before then there is no need to replace parts.

Scott

**rocky321** · 11-08-2010 07:41 PM

Originally Posted by ScottR

When you assemble the bolt the plunger flat MUST rest on the extractor shelf for the bolt to work properly. If your bolt was working properly before then there is no need to replace parts.

Scott

Haven't shot it yet, just making sure everything is in order.

**painter777** · 11-08-2010 09:31 PM

**rocky321** · 11-08-2010 09:33 PM

Originally Posted by painter777

http://i40.photobucket.com/albums/e2...9/DSC06034.jpg

Awesome picture! Thanks!

Thread: Bolt Parts

Thread Tools

Search Thread

Display

Bolt Parts

Similar Threads

1903a3 bolt compared to 1903A4 sniper bolt

remington 513t bolt parts

Bolt Release lever or do you rotate the bolt head?

WORLD WAR 2 GERMAN MAUSER BOLT PARTS NUMBERING SERVICE (eBay)

Tags for this Thread

Posting Permissions