And they have that as well for about $100 bucks but it has to be sent to a dealer and it is, I believe, built in the Phillippines like the RIA pistols. I have one I built a few years ago and it runs like a charm. Back then almost all parts but the frame were GI but I don't believe that is true now. You would have well under $400 in the gun even considering shipping unless your dealer is really high on transfer fees. The pistol will be in .45 ACP and I believe I read they are putting new barrels into them. The picture shows the safety tube and ejector installed. On mine the front sight was already installed and staked. You might ask about that if you are interested and don't have the tools. A friend got me started building the 1911 clones and before I knew it I had five. It is a lot of fun building one and you learn a lot about the gun as you go. Not difficult at all. Bill.