Sear, and hammer M1A1..592534

[Garandrew]

Unlike my other Inlands, there is no maker name on top of this sear, must be on side, and can anyone make out the hammer manufacturer?..Im not removing the parts.."S" undeneath op slide box, and 4 underneath trigger housing lug

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[usgicollector]

Looks like an upside down H.I. on the hammer.

[Garandrew]

Hemphill?..Someone suggested N, for NCR once? No dead giveaway?

[Garandrew]

NL 346 does report the letter with serifs sometimes seen under the box
From 346, Im thinking it has to be "HI" on the hammer

[Bubba-7]

I think the hammer is I-I, some Inland sears were marked BI on the left side. I don't remember seeing a HI with serfs, but all I-I that I have seen had serfs.

[Garandrew]

Bubba..it could be an "I"..Are Inland made hammers rare?

[BrianQ]

It is an I but it is after an H. not another I . Hemphill hammers are marked H.I. and HI

There are no periods after the letters in the I-I mark.

[G26ster]

It is an I but it is after an H. not another I . Hemphill hammers are marked H.I. and HI

There are no periods after the letters in the I-I mark.

Brian, would you say the hammer on my 265k Inland is the same? Looks that way.

[Garandrew]

Brian, good catch on the period..I now think it is H.I., as 346 suggests it could be

[Garandrew]

No serifs on yours G26, the info ccnl on pg 346-20 shows HI, or H.I. both with serifs