-
Senior Moderator
(Milsurp Forums)
Colt magazine ???
Fellas, more than a few of my Colt 20 round magazines have an I inside a U on the edge. Who made these magazines? TIA
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Bill Hollinger
"We're surrounded, that simplifies our problem!"
-
-
02-25-2011 12:09 PM
# ADS
Friends and Sponsors
-
Senior Moderator
(Milsurp Forums)
I did find that UI for Colt is Okay Ind. Is this correct and if so, what does the UI stand for???
Bill Hollinger
"We're surrounded, that simplifies our problem!"
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
Universal Industries. You will also find these with floorplates marked with an S over I in a box and
M16/M16A1 CAL 5.56mm
UNIVERSAL INDS. DIV.
SIMMONDS PREC. PROD. INC.
WEST HAVEN, CONN. U.S.A.
-
Senior Moderator
(Milsurp Forums)
Thank you Roscoe. All mine are Colt marked floor plates.
Bill Hollinger
"We're surrounded, that simplifies our problem!"
-
-
FREE MEMBER
NO Posting or PM's Allowed
If you have any with the black plastic follower and the floorplate marked
[Colt logo] CAL.5.56MM
COLT'S FIREARMS DIVISION
COLT INDUSTRIES
HARTFORD, CONN. U.S.A.
look on the inside of the mag on the right side in the middle just below the feed lip. You will find an Okay logo.
-
Senior Moderator
(Milsurp Forums)
I have four with the Okay logo inside four with numbers stamped inside like 6 and 8 and four with the UI. Thanks for the information. I learned sumpin today!
Bill Hollinger
"We're surrounded, that simplifies our problem!"
-