On a cleaned gun, I use G96 silicone gun treatment on a patch run through the bore and wiped on the exterior metal parts. It will not affect wood finish. I store the gun with the bolt closed and the bolt uncocked. Open the bolt and draw it back, hold the trigger back and close the bolt. This action will release the firing pin spring without dry firing. If you are really concerned, pull the cocking piece back far enough to set the bolt cocking piece on half cock----this will prevent "experts" from opening the bolt.
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.