-
FREE MEMBER
NO Posting or PM's Allowed
-
07-02-2011 08:22 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Thats weird. They shouldnt move. How often do you shoot it? One of the pins might be broken. When i took my apart, i tapped one pin out from the left side but the other one i ended up drilling out. I hit it from booth sides and it wouldnt move. I brook 2 punches and than i had to put the flash hinder in a vice and use a wrench to twist it off.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Originally Posted by
Calhoun J
That's weird. They shouldnt move. How often do you shoot it? One of the pins might be broken. When i took my apart, i tapped one pin out from the left side but the other one i ended up drilling out. I hit it from booth sides and it wouldnt move. I brook 2 punches and than i had to put the flash hinder in a vice and use a wrench to twist it off.
That's what I thought " Very Weird" I don't shoot it very often, more of a wall hanger than anything. Looks like it's a trip to the gunsmith.
-
THere has been many threads about this problem and it is simple to solve properly..., as per the good book ..... and that doesn't involve locktite or superglue. Ask someone who's clever to resurrect the old threads. But you have got to have the right kit and a sheet of glass or a surface plate.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks Peter, I found one of your articles on how to repair the flash hider. I'm not to sure I want to try it myself. Last thing I want is a messed up rifle. Where would I find Morse pins ? Jack
-
Morse taper pins in the US. I'm not sure but I'm sure someone on the forum will know. But if it was mine and it had a loose flash eliminator I'd tin it first, sweat it on and align it THEN clean out the taper holes and insert new pins. DO NOT hammer them in as they will taper lock in any case. Hammer them in and you WILL pucker the barrel. Just a tap will tighten them
-
-
FREE MEMBER
NO Posting or PM's Allowed
I'll have to talk to some of our local gunsmiths. I know what I can and can not do. Thanks, Jack