-
FREE MEMBER
NO Posting or PM's Allowed
I restore things besides guns...
Hello All,
Over the last several months I have been restoring a toy of my youth...a 1954 Murray Supersonic Jet Pedal Car. It has been restored to as close to original as possible. I am missing one peice however, the shifter that should go on the control panel. If anyone has one or knows someone who does i would appriciate if you would let me know. I did all work in my garage in my spare time over the last few months. The starting condition was pretty pitiful to start with however I sadly did not take before pictures. Total I have more than 100 hours of work into this old girl. The paint is Rust-Olieum that I bought at my local Menards. The graphics were ordered over the internet. The chain guard(red at bottom) I fabricated and the tires I bought at Ace Hardware in the mower section. Also pictured is another mid 50's pedal car that my father restored with my brother. It is the Happy Time Commet also by Murray. Let me know what you think.
Mdrim13
**The pictures of the Happy Time Commet would not load so I will try and post them tmorrrow.**
Information
 |
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
08-15-2011 10:22 PM
# ADS
Friends and Sponsors
-
Nice job. Great color scheme.
Looking in the background there you either you have a lot of children, or a lot of projects backed up.
Ever watch American Restoration, guy works in Las Vegas. Maybe he can help you with that shifter.
-
-
FREE MEMBER
NO Posting or PM's Allowed
They actually restored one recently that the pawnstars bought. Original shifters are impossible to find almost. And by the way I dont have any kids, as I am the kid 
Last edited by mdrim13; 08-16-2011 at 12:08 AM.
-
Nice job mdrim13 it looks great! Always surprising the way the hours add up, but I'm sure the finished product makes it worth every minute. Thanks for showing.
-
-
Legacy Member
That is really a very nice piece. Good work, looks awesome!
-
-
A pleasure to see..............
-
-
Moderator
(M1 Garand/M14/M1A Rifles)
"It is said, 'Go not to the elves for counsel for they will say both no and yes.' "
Frodo Baggins to Gildor Inglorion, The Fellowship of the Ring
-
-
In the 50's there used to be a childs pedal car like this made in England
. I think it was made to give work to pressed steel workers and the car was based upon a post war AUSTIN (Austin Somerset I believe.....). Does anyone in the UK remember them? I believe that they're highly collectable now
-
-
Legacy Member
Yup, I had a pale green Austin J4 (?). Heavy as hell for a toddler to pedal on gravel or grass. Real spark-plugs in the pretend engine, large battery for the lights. Have still got the scar on the back of my leg from sliding off the bonnet over the 'flying A' emblem. Later models had it removed.
I think they were built at the Austin factory, and most seem to have ended up on fairground carousels. I couldn't afford one now. Typical British industry to make a retro car. At that age I think I would have preferred a supersonic jet car 
-
-
Contributing Member
Beautiful restoration! I greatly admire people who can do such things and do them as well as you have done. I was just thinking about kids - I'd be very hesitant to turn that over to a child.
-
Register To Reply
