-
FREE MEMBER
NO Posting or PM's Allowed
My BSA No.5 MkI
I picked this up several weekes ago. I was on Gunbroker and I toyed with buying it - and sent a question to the seller - but missed it closing. There were no bids on it. The seller had answered my question just before the bidding closed. I contacted him and asked if he was going to re-list it or if he'd sell it. I decided to go ahead and buy it - and am very glad I did.
Mostly matching/properly marked. The only two parts that jump out at me as having off marks is the magazine - clearly originally from a Long Branch No.4 - and the locking bolt is from Fazakerly.
It's an early import to the US and the bore/barrel are a little frosty but rust and pitting free. I'm looking forward to firing it!
I'm looking for an unmarked magazine for it - but in no rush. I posted some pics of the current magazine - maybe someone owns that rifle here!
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
12-20-2011 04:06 PM
# ADS
Friends and Sponsors
-
Legacy Member
When you say locking bolt do you mean safety catch? Because the bolt is definatly BSA!
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
I'm going by the terminology in Stratton's book on No4s and 5s. The locking bolt being a piece of the safety assembly - visible in my next to last picture on the left side of the receiver. It is marked with an "F" on the inside.
-
FREE MEMBER
NO Posting or PM's Allowed
-
FREE MEMBER
NO Posting or PM's Allowed
I have a BE prefix series/1945 date with metal forestock cap and marked in a similar manner. I too wouldn't sweat the safety being a Faz component. The magazine in my JC is marked M/8. I think any WWII coded British manufacture magazine would be 100 percent correct though the hardcore Enfield purists would consider an M/56 coded example as de rigeur. Remember--any JC manufactured before 1946 will not be fitted with a factory serial numbered magazine.
Last edited by barbarossa; 12-21-2011 at 12:45 AM.