-
FREE MEMBER
NO Posting or PM's Allowed
-
12-22-2011 10:49 AM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
55 grs vol 2f ,then what ever the bal. space left over in the case i use c/w and mix it with the 55 2f. works good and can't get any cheeper than c/w. remember as you know ,NO air space left in the loaded case.--charles
-
-
FREE MEMBER
NO Posting or PM's Allowed
I use 55 grains of 2F as well, behind a 405 grain cast bullet. I have to use a drop tube and still compress the powder some to fully seat the bullet, no room for wad. I've used vintage brass (U.M.C. SH) and modern Starline. Vintage brass seems to accept more powder. This shot thru a 77 carbine. Cheers, Don
Last edited by drweiler; 12-26-2011 at 10:27 PM.
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
mannparks
55 grs vol 2f ,then what ever the bal. space left over in the case i use c/w and mix it with the 55 2f. works good and can't get any cheeper than c/w. remember as you know ,NO air space left in the loaded case.--charles
Do you use a cookie on top of the BP and then put the C of W and then the bullet?
-
FREE MEMBER
NO Posting or PM's Allowed
there are many recipes to make an apple pie.
c/w is mixed in with the powder charge. but it is only used if and when there is air space in the case thet needs tho be taken up.
if .55 gr of 2f +a wad are incerted in the case and there is not enough room for the bullet to be instauled with out compressing the charge,c/w is not nessary.--charles
check out the [bpc]r sights
Long Range BPCR .com Home Page
www.BPCR.net