SA 1-42, with type 1 short pinion lockbar

[EdG]

I have 690243 with the -12SA RE6B with the hole and 754677 with the RE6B without the hole.
The -12SA RE5B on 613217 certainly could be original. I'll add that one to my database and note your reservation about originality.
I'm also adding your info on 519576 and 524290. I didn't have those either. Thanks, Robert.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[mdrim13]

I have 690243 with the -12SA RE6B with the hole and 754677 with the RE6B without the hole.
The -12SA RE5B on 613217 certainly could be original. I'll add that one to my database and note your reservation about originality.
I'm also adding your info on 519576 and 524290. I didn't have those either. Thanks, Robert.

I have 676292 from 6-42 with the -12SA RE6B bolt that does have the hole on the right side lug. I believe this to be the original bolt to the rifle as most parts were correct on the gun. What was replaced was probably the work of our dear friend bubba, however the type two lock bar it wears was likely put on it in service.

I dont know that this helps you, but it is what I have to offer as far as info goes. Maybe you can use it in your database or something? Interesting stuff though.

-mdrim13