I'm sure I've posted this on here before, EMEI WEAPON D 259, 3. Selected rifles are to function mechanically and woodwork is to be free from cracks and splitting which may interfere with normal handling.
4. Selected rifles are to be converted as follows:
a. Grind about 15mm from front of firing pin.
b. Fill in firing pin hole with weld.
c. Stamp or engrave the letters 'DP' adjacent to the rifle serial numbers.....................
PAINTING.
5. Paint a 75mm wide golden yellow band 60mm forward from the rear of the butt where the butt plate is screwed on, and another band 75mm wide at the handguards left and right. Paint in black the letters 'DP' 25mm high on each side of the butt and on each side of handguard adjacent to each other.