WarLord, your pictures are very small and with my poor eyesight I have difficulty in seeing clearly what your pictures show. However, I have restored several sporterized rifles to original configuration but they all conformed to a certain criteria:
1. the serial number on the back face of the bolt handle had to be the same as the serial number on the receiver (in your case the receiver number should be electropencilled on the left receiver flat - and should also be on the left side of the butt socket.
2. The barrel had to be in good condition and be uncut - i.e. the bayonet lugs should still be present at the end of the barrel.
3. The receiver should not be drilled and tapped for scope mounts. (yours may have a non gunsmithing mount from what I can make out).

If these criteria are met, the relevant fore stock, handguards and barrel bands can be found for reasonable pices at several dealers (such as bdlltd.com ) or from e-bay.