-
Legacy Member
Sharps Borchardt
Attachment 37769
Hi All, I'm hoping someone can help me with this stock stamping. I bought a Sharps Borchardt military rifle in 45-70 that has this stamped into the stock near the butt plate. Does anyone know what this means. I have Frank Seller's Sharps book, but cannot find any reference for this marking. I appreciate any opinions.
Thank you,
Tom
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
10-28-2012 02:20 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Looks like the accepting inspector's initials, but normally they are near the wrist.
-
-
Advisory Panel
Another possibility is that collectors in the 1950's had stamps made of their initials to mark arms as their property. This was considered necessary to prove ownershp of older guns that did not have serial numbers. Some placed business cards under buttplates. I have a lee enfield with a broad arrow F marking from the collection of a Mr. Fiend.
-
-

Originally Posted by
Johnny Peppers
Looks like the accepting inspector's initials, but normally they are near the wrist.
That's where the marks were on the two I've had. Underside a little behind the tang.
-
-
Advisory Panel
I looked at the two I have and they don't have this mark. On is ex-Michigan National Guard and the other one has "PV 76" nicely engraved on the top of the receiver. Does anyone know the derivation of this PV mark. I think it might be a Pennsylvania National Guard unit (Pittsburgh or Philadelphia units?) during the Spanish American War.
-
-
Legacy Member
Thank you guys for your input. I checked the rest of the stock and there are no other markings. This LB in a circle is the only one and it is stamped on the left side of the butt stock about an inch from the metal butt plate.
Thanks again,
Tom
-
-
FREE MEMBER
NO Posting or PM's Allowed
Could this be the Hugo Borchardt who designed the C93 pistol that Georg Luger further developed into the standard Luger P 08? Borchardt worked in several US factories for a time. It would certainly increase interest in the item over here.
-
Same fellow. One of the best falling block designs ever. But the US BPCR rules won't allow it as there's no hammer, exposed or otherwise. Striker fired. Very strong action. The military type sights are kinda pitiful, though, and I would not drill one for a tang sight- it just seemed wrong. So they finally went away.
-
-
FREE MEMBER
NO Posting or PM's Allowed
-
FREE MEMBER
NO Posting or PM's Allowed