If you have a pressand a shell holder for the cartridge you can do what I have done with 8x60R kropatschek ball and blanks. Sandwich two blocks of wood together and drill a hole smaller in diameter than the bullets you are going to pull. Put a loaded round into the shell holder in the press and run it up so that the bullet is above the opening in the top of the press (no die in the press). Now place the two blocks of wood around the bullet and clampthem together so that they sqeeze the bullet firmly. Now lower the ram on the press. If the bullet is clamped firmly enough, it will be pulled out when you lower the ram.
john