Quote Originally Posted by ChevyGuy7 View Post
its normal, just means i cant use the brass to reload.
A touch of explanation:
The slight bulge means that the case has expanded to fit the chamber of your rifle.
(BTW, try measuring the bulge diameter. You will probably find that the increase over a new case is smaller than your eyes tell you.)
Fully resizing the case thus means that the brass is being worked more than if there were no bulge.
So just neck-size the cases and you will have no problem if they are only used in your rifle.
And if you haven't (yet) got a necksizer, try simply backing off the normal sizer about half a turn. This leaves a small section at the bottom of the neck that has not been resized, and will actually help to center the necks when the reloads are chambered.
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.