-
Contributing Member
The only officially military adopted .22 US Model of 1917
As I'm typing from my iPad, I'll start only with a few pics. If some are interested, I can start a MKL
entry aswell.
For the moment I'm just curious if someone will recognize the rifle :-)
Attachment 43891
Attachment 43892
Attachment 43893
Attachment 43894
Attachment 43895
Attachment 43896
Attachment 43897
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
06-19-2013 01:41 AM
# ADS
Friends and Sponsors
-
Advisory Panel
-
-
-
Legacy Member
-
-
FREE MEMBER
NO Posting or PM's Allowed
-
Contributing Member
It's a Danish
Gevaer M/60, there were only 2500 of those being made. Officially adopted in 1960, note the Danish modified front sight (pin instead of the original one) and the applied serial on the buttstock (typical Danish marking).
These would have all been destroyed, since they were never put for sale and only used for training. The barrel is a feed barrel, nearly as long as the original one. The barrel has been fixed to the original barrel with two pins which have been placed through vertical holes already at the beginning of the barrel.
Will post better pictures as my time schedule allows it, sorry I haven't been able to do anything within the last days.
-
The Following 5 Members Say Thank You to Promo For This Useful Post:
-
Legacy Member
-
-
Contributing Member
I know it is late, but attached the promised better pictures.
Note that the rifle does not have a magazine guard, it came as shown. It might not be the best idea in regards of bedding, but after all it's only a .22 rifle.
The bolt has been cut back and a new bolt head has been added, which had been pinned and cannot be disassembled. Same for the barrel - closely to the receiver (where usually the chamber is, where the feed barrel has a thicker diameter) there were two holes drilled through the barrel where pins were added which now hold the feed barrel in place.
Note that the rifle has a single shot adapter being welded in place. And after the conversion has been done, the whole rifle has been reparkerized in a dark grey colour.
I've made a few comparison pictures of the "new" extractor pin and the shortened firing pin where I've placed original M1917 parts along those, to show the difference.
To the frontsight, this frontsight is typical for Denmark
and can also be found on .30-06 M1917 from Denmark.
The added feed barrel ends not that far away from the original muzzle. I've tried to make a picture, but wasn't that easy. It's probably 2" behind the muzzle.
Worth mentioning: I took it to the range. At 200 metres. Yes, 200 metres for a .22. And after adjusting the sight to the correct heigh I didn't miss any of 25 shots on folding targets ("human targets", since I was at the military range). Pretty awesome I think for a nearly 100 year old rifle design which was converted to .22 in 1960, so basically a 50 year old .22 aswell.
-
The Following 2 Members Say Thank You to Promo For This Useful Post:
-
Advisory Panel
Very nice rifle. I still want one. It must shoot like a dream.
-
-
FREE MEMBER
NO Posting or PM's Allowed
i need one of those in the worst way ,
-
Contributing Member
If I ever can get hold of another one, I'll let you know ...
.
Besides, I've written a mistake: not 2500 but only 2000 of those were produced. So even 500 less. And it really shoots like a dream, though feeding with cold fingers is a bit annoying. But makes great fun.
-