-
FREE MEMBER
NO Posting or PM's Allowed
M57 Question
The magazine of my M57 pops out of the frame after almost every fired round. How can I keep this from happening?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
09-27-2013 10:19 PM
# ADS
Friends and Sponsors
-
Legacy Member
File the top of the slot on the magazine a little to open it up. Sounds like your magazine isn't locking in place fully. If that doesn't work check to see the Mag latch isn't screwed up.
I should add while you have the file out check for burrs in the mag slot.
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
I think it is the magazine WarPig. I used a different one today with no problems. The problem magazine might be one of the after-market ones from a CZ. How can you know for sure?
-
Legacy Member
Know for sure it's the magazine.??.... File the slot on the offending magazine and try it out. I'm 99% sure that is your problem, probably a knats nut hair off which is preventing the Mag catch from seating...
-
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks. I'll file out the notch and try it again. No, I meant how do you know if the magazine is an M57 one or one of the modified CZ mags?
-
Legacy Member
Oh, I don't know...
-
Thank You to WarPig1976 For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
Filing the slot out a little did the trick. My son and I fired 5 full magazines today with no problems. Thanks WarPig!
-
Legacy Member
My pleasure,,,
-