-
Advisory Panel
Maybe another clearer pic would help.
-
-
09-30-2013 08:05 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Ok I will get one. Those were pics I already had and I just cropped them so the quality wasn't the best. Thanks you for being so helpful browningautorifle!!
-
-
Legacy Member
There was a contract to Winchester for riot guns with factory sling swivels to be installed . This was in late '41 / early '42 for the National Guard and was for model '97 s only. These are found in the 912,000 range. They are the ONLY known contract for riot guns with sling swivels in the WW2 and before time periods from any mfg. It is not unknown for guns to be retrofitted with factory swivels during rebuilds , however , but these would be the under tube type.
Baring any further information , I'd have to say this is an add on . By whom and when is anyone's guess.
Chris
-
Thank You to emmagee1917 For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks for te information. Has to be kinda common I seen another fellow on here with the long setup as mine. I will get more pics. Was really busy at work all day. Thanks all
-
Legacy Member
That's a trench gun magazine plug. Trench gun mag plugs have the centering stud on them for the bayonet adaptor. Riot gun mag plugs have a flat face (no stud). Most, if not all, of the original Model 12 riot guns do not have sling swivels. But if you must have swivels, you need to find a Model 12 barrel band that has the swivel and a riot gun mag plug. I suspect the barrel band with integral sling swievel will be a very difficult part to find.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Huh so it's a trench mag plug? That's very cool. I have seen the barrel bad with the sling adapter on it. While I was searching for this subject. I'll have to pick one up. Where would I find the magazine plug?
-
Advisory Panel
That's what I first though too...but I still wonder if you could maybe take a close up pic of the front of the mag plug...not a blow up of the rear angle.
-
-
Legacy Member
A trench plug would have a solid projection. One for a swivel would have to have a cross drilled hole.
A '97 trench plug would not have the take down pin nor a hole for it. The model 12 plug I think ( don't have one to look at ) has the hole drilled but does not use it.
Chris
-
-
FREE MEMBER
NO Posting or PM's Allowed
ok guys heres some more pics. help haha
-
Advisory Panel
Right, that's a sling swivel stud. Just a very recent attachment. Brand new and not military for that gun. This is why clear pics are priceless, it saves conjecture...you still need an original mag plug and the front band with the swivel on it. Maybe a clear pic of the butt swivel would be in order...?
-