.38 Webley Mk. IV problem.

[browningautorifle]

Thanks for the end result, most times we never hear how it ended...

[Peter Laidler]

I agree with BAR. Always nice when someone comes back with a result. Makes you realise that you're doing/saying something useful

[Mark-II]

I just bought a Webley IV .38 myself. It is a war time gun, evidently.

To cut to the chase, how hard is it to replace the pawl with one from a parts house and have the gun work properly?

I'm somewhat mechanically inclined, but I've never pulled apart and reassembled a revolver.

With my pistol the cylinder does not quite lock up when cocked for single action. We're talking a millimetre or less of rotation to get it the rest of the way. If the hammer is held back and the trigger pulled then it will advance that little extra bit and lock up. Looking at it the tip of the pawl appears to be worn, with a slight step or notch in it.

I'm supposed to be getting an RMA replacement from the dealer, but he has stopped responding to emails, so I am exploring the option of fixing it myself if he leaves me hanging.

[WarPig1976]

I just bought a Webley IV .38 myself. It is a war time gun, evidently.

To cut to the chase, how hard is it to replace the pawl with one from a parts house and have the gun work properly?

I'm somewhat mechanically inclined, but I've never pulled apart and reassembled a revolver.

With my pistol the cylinder does not quite lock up when cocked for single action. We're talking a millimetre or less of rotation to get it the rest of the way. If the hammer is held back and the trigger pulled then it will advance that little extra bit and lock up. Looking at it the tip of the pawl appears to be worn, with a slight step or notch in it.

I'm supposed to be getting an RMA replacement from the dealer, but he has stopped responding to emails, so I am exploring the option of fixing it myself if he leaves me hanging.

I would suggest watching some YouTube videos, I'm sure there's at least one on there of a fellow showing how to break one down. That'll give you an idea if it's something you want to tackle yourself. I would think it's a simple swap job. It's good to do anyway with a new Milsurp firearm to give a good cleaning and inspect all your parts.

Take your time, take pictures as you go if you have to "so you can put it back"
and whatever you do,, don't start filing on stuff...