03A4 serial#?

[JGaynor]

The preponderance of 2nd order/3rd block A4's will have two groove barrels and scant stocks. Origninally they would have been equipped with M73B1 telescopic sights most likely the variation with stamped nomenclature, The Weaver name and addrress and the resettaabke zero scales on the w&e knobs.

Also look for factory inspection and ordnance acceptance stamps on the left side of the stock just above and behind the trigger (RA, Ordnance Escutcheon, FJA) a "P" proof mark in a 7/16" circular surround on the stock grip or wrist, at least five sub-inspectors marks on the bottom of the stock forward of the magazine box assembly and a Maker's mark in the cutoff notch (most often an upside down "K").

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Tarheeler]

Thanks guys, rifle has c stock on it, with no inspection codes on it, but had upside down K in cut off. Have not had my hands on it yet. Thanks for the input, will get back if and when I look at it

[Tarheeler]

Checked back and it does indeed have a scant stock on it, correct mount, rings, and bolt, but has been reparked. He's asking 3600.00- Price range