My new Rockola

[phillydude]

Ok I waited almost 6 weeks to get this, I bought it with just the pictures I posted on my earlier thread. I will be asking many questions and I hope you do too.picture heavy sorry if I posted more than one each



ATTACH]52607[/ATTACH]Attachment 52608Attachment 52609Attachment 52610Attachment 52611Attachment 52612Attachment 52613Attachment 52614Attachment 52615Attachment 52616Attachment 52618Attachment 52619Attachment 52620Attachment 52621Attachment 52622Attachment 52623Attachment 52624Attachment 52625Attachment 52626Attachment 52627Attachment 52628Attachment 52629Attachment 52630Attachment 52631Attachment 52632Attachment 52633Attachment 52634Attachment 52635Attachment 52636Attachment 52637Attachment 52638Attachment 52639Attachment 52640Attachment 52641Attachment 52642

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[phillydude]

Wrong hammer, butt plate I think and sling swivel, but correct type 1 band, muzzle wear is 1

---------- Post added at 10:58 PM ---------- Previous post was at 10:54 PM ----------

I came up with an E158 slide , correct me if I'm wrong,

[phillydude]

Forgot to mention it came with a mint type 2 sling and a USGI oiler but I can't make out the mark on it, 4 boxes of remington 30-30 ammo and 4 simulator booby traps

[phillydude]

Attachment 52643Attachment 52644Attachment 52645Attachment 52646Attachment 52647Attachment 52648

[phillydude]

Weld scars did t come up very good Attachment 52649Attachment 52650Attachment 52651

[Rustship]

Very Nice, Good Find Brian ! I understand a KR dog leg is very, very hard to find.

[DaveHH]

of a very rare carbine. My NPM has a KR hammer but it isn't a dogleg. Underwood sent a few thousand hammers to Rockola but not until 1944. Thanks for letting us see this gem.

[phillydude]

The oiler has *****BROS***** written on it very faintly, it's kind of worn away so my guess it's post war. It has a rubber gasket inside. I have yet to go through all the ammo and mags, but the ammo appears to be reloads to me (just the stuff in the ammo boxes), about 500 rds are new in the box stuff

[painter777]

Is that a IMPORT STAMP I see????


Kidding.

Your good to go on that Butt plate.
RMC used that style from mid-late production IIRC.

I believe that would be the type 1B receiver, having just the one rectangular slide notch and 2 upper/ side notches

Cheers,
Charlie-Painter777

[painter777]

The oiler has *****BROS*****

Poley Bros & Verson..... then something else. hah can't remember.