-
FREE MEMBER
NO Posting or PM's Allowed
1899 M91TS questions
Good Evening All,
I've been expanding my WWII collection and came across a Carcano that I first thought was an M38. It was missing the upper hand guard, front and rear bands. I won the auction and found when it arrived that it is Brescia M91TS dated 1899. There is minor pitting along the stock line in a few places. The bore appears sharp, dark, but shootable. The bolt was a mess and did not function properly but after disassembling and cleaning I believe it is usable. It was sitting in a stock that it does not fit in properly. The stock has two bolts that I believe are recoil lugs? Does anyone know what rifle this stock belongs on? I'm very new to Carcano rifles and the more I read the more I realize the combinations are almost infinite - and the more confused I get.
My plan is to configure the rifle to a 91/28 as I believe that is how it would have been set up in WWII. So, I can work on the stock I have to get the rifle fitting properly, but still need to find the upper handguard, or I can replace the stock entirely. Thoughts? I have already ordered the upper and lower bands, band spring as well as a follower and follower spring. Concerning the handguard, any ideas where I can get one? I've scoured the internet and haven't found a thing.
I can post additional pics later if that would help.
However, I also recognize that this rifle is only a second year production Moschetto 91TS, so I wonder if I should put it back to its original configuration?
I appreciate the wealth of knowledge I've received related to a different rifle a while back and look forward to the same on this one.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
02-10-2014 09:59 PM
# ADS
Friends and Sponsors
-
Contributing Member
Before you do anything, you need to verify the caliber. This rifle has all the appearances of a post war conversion to 8mm. Carcano's do not typically have stock bolts, let alone two of them and this is something that was done to them during this conversion. Very early rifles have one stock bolt in the receiver area but these were phased out as internal reinforcement was added.
-
The Following 2 Members Say Thank You to Aragorn243 For This Useful Post:
-
-
FREE MEMBER
NO Posting or PM's Allowed
QUOTE=Aragorn243;288852]Before you do anything, you need to verify the caliber. This rifle has all the appearances of a post war conversion to 8mm. Carcano's do not typically have stock bolts, let alone two of them and this is something that was done to them during this conversion. Very early rifles have one stock bolt in the receiver area but these were phased out as internal reinforcement was added.[/QUOTE]
I believe it is 6.5. I have some PRVI 6.5 ammo and the bullet fits well at the muzzle. Not the most precise method, but I don't have a micrometer. The rifle does not fit correctly in the stock so I assumed it may have been for one of the 8mm rifles that somehow found its way to this rifle, but I haven't found any info online specific to those two stock bolts. However, there are plenty of pics online showing carcanos with those bolts. With a little work I can get it mated to the stock correctly, but if the two would never have met during arsenol overhauls I'd rather go in another direction.
Last edited by Rhpd201; 02-11-2014 at 09:52 PM.
-
Contributing Member
"Italy's Battle Rifle" only shows the 8mm conversions with those two stock bolts so it may have been bought and installed by someone trying to restore the rifle without knowing the difference. They admit to not having every variation but I doubt they would put stock bolts in a standard 6.5. Your barrel would eat 6.5 if it were 8mm so definitely not 8mm.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks for looking that up. I think I'll drop that stock and look for a complete stock set. There's a dealer I've seen at the Tulsa gun show with a large Italian inventory. Maybe I'll get lucky. Those (91/28) handguards are terrible to find - I may have to make one....
-
FREE MEMBER
NO Posting or PM's Allowed
can you take picture of the bayonet lug? It will tell you if it is in a m91TS or m91/28 conversion. I luckily acquired a M91TS repaired in 1928, but they kept it in m91TS configuration.
-
FREE MEMBER
NO Posting or PM's Allowed
It is a TS, my camera didn't do the best job but here's the pic:
Since I'm a WWII collector, I prefer putting it in a configuration that would be correct for WWII. Since my original post I have not been able to find a correct stock.....hmm.....it might be easier to catch a unicorn. I don't really want a converted rifle because of the twist problem; however, I might be interested in a trade for a true 91/28.
-
Contributing Member
Something is not right about that front sight and I don't have time this morning to investigate it further. I'm starting to suspect however that you have a cavalry carbine, not a TS. In any case, you are missing the front barrel band and bayonet lug.
The reason I say this is because the front sight matches nothing I can find and the small stud on the bottom doesn't match anything either. The upper sight looks like that found on a cavalry carbine but is difficult to tell as they have a folding baynet which fits around the sight and which may explain the bottom stud.
-
-
Contributing Member
OK, did some more investigating this afternoon and it could indeed be a TS, the original one, not the M91/24TS which is what I was looking at this morning. This version could come with either the standard bayonet lug or the "TS" bayonet lug
-
-
FREE MEMBER
NO Posting or PM's Allowed
You are much more versed in these than I and I defer to your expertise. My research indicated to me it is an original TS. I think they we're converted because the bayonet issue. Correct me, but I think either stock set (91/24 or 91/28) would work and be correct for the upgrade..