Quote Originally Posted by rnd0003 View Post
Its not moving, thats what Im trying to figure out. Im afraid to move past tapping.
I've never had one stuck that a brass punch wouldn't move. The two times I've had problems I stripped the furniture off laid the rifle on the floor put a block of oak under the sight block and tapped using brass punch. First I tapped it the way I didn't want it to go it was the same exact problem as yours and drifted it all the way out. I carefully cleaned up the staking burrs on the block and put a new blade in, the biggest size I had.
I learned the hard way before, if you think a hammer is the solution put your gun down and think it over for a few days.