-
FREE MEMBER
NO Posting or PM's Allowed
Newbie Carcano owner
Greetings.
In an impulse move today I purchased my first military weapon, a 1940 6.5mm Carcano M38 Calvary. The barrel markings are F.N.A BRESCIA, 40-XVIII, serial number XF3802 and the matching 3802 is burned into the stock. It appears to be complete with adjustable rear sight and folding bayonet (no cleaning rod under the butt plate).
I knew nothing about these rifles before today and have had a crash course in basic identification. I honestly bought it because it was a cool looking carbine. If I had done just a little checking on ammo availability/cost I may have walked away, but it’s mine now and I’d like to make the most of it.
With the help of YouTube I disassembled the bolt, cleaned and inspected the spring and firing pin. The action and safety both function, seemingly, as intended.
5 surplus rounds and 1 clip came with it; however, after doing some measurements with my dial caliper the cases seems to spec bigger than the 6.5x52 information provided by Hornady or Speer. Once I’m confident that I have the correct ammo I would like to shoot this rifle, but first, I need to have it checked over by someone who knows a lot more about this than I do. Can anyone recommend a qualified candidate within a reasonable distance from the Detroit Michigan area?
Thank you,
Bill
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
03-23-2015 12:45 AM
# ADS
Friends and Sponsors
-
Legacy Member
Originally Posted by
CruciBill
the cases seems to spec bigger than the 6.5x52
How does it differ? It's possible the rounds you have are 6.5x54 M.S.. They are very similar in appearance but won't interchange. Can you post pics of the rifle and ammo?
Originally Posted by
CruciBill
Once I’m confident that I have the correct ammo I would like to shoot this rifle,
They'll most likely be duds or have delayed ignition at best. Best bet is to get some new production PRVI ammo but don't expect great things in the accuracy department. Compared to other 6.5mm rifles the Carcano is a bit of an oddball, it has a larger bore diameter. Standard bullet diameter for 6.5mm is .264'' and Carcano's have .267''- .268'' bores so factory ammo seldom produces good results. Hornady used to offer 6.5x52 ammo loaded with .268'' bullets but it was temporarily discontinued several years ago, I'm not sure whether it's been put back into production yet or not. Haven't seen any in a while.
-
Thank You to vintage hunter For This Useful Post:
-
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks for the reply.
Here are some photos.
The neck dia. seems to be correct, the case overall length is 3.145. A little bit longer than either book I have shows and the clip didn't want to easily slide in. Maybe they don't, but I certainly didn't want to force it. I don't think I'll shoot this stuff, but I would like to know if it's correct. The head stamp told me nothing.
IMO I don't have a lot of $$$ into this rifle. If it's safe to shoot I will probably buy whichever commercial loaded rounds I can find and start harvesting brass for hand loads.
Thanks
Bill
-
Legacy Member
Those are 6.5x55 Swedish M/94 rounds.
Carbine looks nice. Should be a good shooter with the right bullets. If you can find them Hornady offers the 160gr .268'' bullet in component form also but only use load data developed for that specific bullet.
Last edited by vintage hunter; 03-23-2015 at 10:17 AM.
-
Thank You to vintage hunter For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
Thank you for the ammo ID.
Now that I know what I have I guess I'll have to start looking for a Swedish 6.5 rifle as a companion piece
I appreciate the load info, I'll definitely check into that.
-
Contributing Member
Privi ammo is pretty easy to get. Lots of it at the gun shows and lots of internet dealers. Not the most accurate stuff as already pointed out. Shoot it to make some noise and reload the brass.
-
Thank You to Aragorn243 For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
Originally Posted by
Aragorn243
Privi ammo is pretty easy to get. Lots of it at the gun shows and lots of internet dealers. Not the most accurate stuff as already pointed out. Shoot it to make some noise and reload the brass.
I ordered 5 boxes of Privi from Graf. It was cheaper than getting brass. The bore looks good, so I'll run some through it and save the brass.
Thanks.
-
FREE MEMBER
NO Posting or PM's Allowed
I received the Privi ammo from Graf yesterday along with the correct stripper clips from Amazon. Now I just need to get to the range.
-
Contributing Member
Put up a GIANT piece of cardstock, otherwise you may never know where you are hitting. I have a suspicion part of it was not having the right sight picture. I believe the Carcano sights are designed to have the top of the front pin all the way at the bottom of the "V" I was always taught to hold top of pin at top of V so I was probably shooting way high. I did have better luck with my 38 carbine than I did the cavalry carbine.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Good point, I appreciate the advice. Any guess on if the adjustable rear sight was originally zeroed in for 200 yards like the fixed sights were?