I loaded up some 150 grain with 48.5 H414 starting load for that bullet. I also will check it with some factory loads and do two shots with the factory and two with my reloads and see if I can hit paper next week. It is a USGI rear sight. It was slipped up but only half way between 100 and 200 yards. Stock and action seem OK. The only thing I noticed was that when I went to put the bolt down in most every case it took a lot of force to drop the bolt handle. Not to say I had to hammer it or anything but I had to tap it with the palm of my hand to bring it down into battery. At first I thought the bullet may not be seated right but I checked and its under COL recommended for that bullet. The refiling is not perfect but I was hitting two to three inch groups with the same reloads last week.