Bren Mk I magazine

[Vincent]

I sent you several PM's too. Didn't hear back from you.

I will try email.

[Vincent]

If I was using one for 762x54 |I would have an articulated platform to cater for that..........

How does an articulated platform work? Will one work in this magazine body?


Can the original platform be modified?

Attachment 62478Attachment 62479Attachment 62480

[Peter Laidler]

Difficult to explain but the mag platform is in two parts, joined but allowed to articulate to take into account the curvature of the mag necessary for the taper of the cartridges. Probably have to get rid of the guide to allow it to articulate. Simple.........

[TactAdv]

Vince,
I've set this up for your use in contacting me. Use this one to start: noggs4507@mypacks.net

-TomH

[Vincent]

Thanks, Tom. I sent you an email.

[Joe H]

How does an articulated platform work? Will one work in this magazine body?


Can the original platform be modified?

Attachment 62478Attachment 62479Attachment 62480

Vincent,

Re: ZB39 Magazine

I can tell you "the articulated platform" won't work for 7.62x54R. I've tried it. You have to remove the box spring guide under the follower to have the articulated follower.

The articulated follower will work for 7.62 x 51 Nato but the last round will jam or not feed. Grinding about .032" of the horns of the magazine follower will solve the "last round" issue (difference between a rimmed and rimless case).

Joe