-
Legacy Member
something from Viet Nam
Interesting AK-47 chest pouch (Chinese I think) and a damaged AK-47 magazine which I also believe is early Chinese manufacture.
The magazine has a smaller than 30 caliber hole that entered the floor plate of a loaded magazine. Looks like a 5,56mm bullet that struck the floorplate, jammed the follower tightAttachment 63218Attachment 63219Attachment 63220 and all the loaded cartridges were dumped out
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
The Following 14 Members Say Thank You to RCS For This Useful Post:
bearrowland,
Bill Hollinger,
browningautorifle,
CINDERS,
Harlan (Deceased),
HOOKED ON HISTORY,
jmoore,
nzl1a1collector,
oldpaul,
rambo46,
rayg,
Tom in N.J.,
Vincent,
xa-coupe
-
06-03-2015 10:22 PM
# ADS
Friends and Sponsors
-
Legacy Member
Is that blood on the flaps or just rust?
-
-
-
Legacy Member
Just dirt on the flaps but there is a large circular spot on the back, the owner might have had a bad day
-
The Following 3 Members Say Thank You to RCS For This Useful Post:
-
Legacy Member
That Chest Pouch would go very nicely with this TYPE 56 Rifle.....

-
The Following 4 Members Say Thank You to nzl1a1collector For This Useful Post:
-
Advisory Panel
Very nice AK. I had several of that kind in the small arms school in Gagetown NB, there were originally 6 folding stock rifles too. That slowly decreased to 1...but anywayzzz, nice Type 56.
-
-
We had a large collection at the Brigade HQ and Int cell in Malaya sent down from Vung Tau and we were always asking the Battalions in Nui Dat to look out for a fabricated body AKM to examine. But so far as I recall we never got one. Did the VC or NVA get AKM's
-
-
Legacy Member
Not sure if they did get many AKM's? There is a small batch of Vietnam bring-backs in New Zealand
, all the ones I have seen so far have been the milled receiver TYPE 56, most have the chambers drilled and bolt faces welded. This one is unmolested except for the inscription scratched onto the butt 3PL V COY 4 - 11- 70 and I believe the carved symbol means "Red Dragon". If anyone can confirm it, that would be great.
-
The Following 2 Members Say Thank You to nzl1a1collector For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
nzl1a1collector
Not sure if they did get many AKM's? There is a small batch of Vietnam bring-backs in
New Zealand
, all the ones I have seen so far have been the milled receiver TYPE 56, most have the chambers drilled and bolt faces welded. This one is unmolested except for the inscription scratched onto the butt
3PL V COY 4 - 11- 70 and I believe the carved symbol means "Red Dragon". If anyone can confirm it, that would be great.
The symbol is the Mah jong symbol for the red Dragon or China
-
FREE MEMBER
NO Posting or PM's Allowed
Well, I can one up U-all.
I have both a chicom AK and a chicom mag chest pouch. Both are Viet Nam bring backs. The AK was registered during the 68 amnesty.
Unfortunately the guy who brought the AK back let the feds conn him into welding it up when he registered it.
Here it is along with my other VN bring backs. Have trophy papers on all but one of the K98ks.
Sarge
Attachment 66187
-
Advisory Panel

Originally Posted by
Sarge 13
Unfortunately the guy who brought the AK back let the feds conn him into welding it up when he registered it.
Since it's registered as an FA, can't you reactivate it?
-