Your series 35 will be much easier and cheaper to restore than the series 1 was. It will be a last ditch rifle all series 35s are. You won't need a rear sight with wings, a dust cover or a monopod as series 35 didn't have any of those things. But you will need a stock, handguard and front band with a bayonet lug the late type. The stock you need will be one of the three piece ones. Also you don't need a cleaning rod the series 35 didn't have them. The hardest thing is you will have to remove the front sight to put on the upper band and the lower band too. The barrel in tapered and the upper band isn't easy to get all the way on so you can drive the pin in that holds it in place. After you get all the sight and band pins back in it will look better if you tack weld them in. There are stocks on ebay all the time. Good luck, I did one just like yours a year or two ago.